Prior research showed that inward moisture diffusion from absorptive claddings such as brick veneer, stucco, or manufactured stone veneer can be significant in wood-frame walls. The inward migration of moisture is greatest when the cladding is heated by ...
The USDA Forest Products Laboratory (FPL) has, for the past two years, been assisting in removing technical barriers to the use of CLT and trying to develop interest in the United States for its utilization. Coincidentally, Promega Corporation, a leader ...
Unlike other solid wood panel systems, ICLT panels are manufactured without the use of adhesives or fasteners. Wood members are connected with tongue-andgroove joints within a given layer and with dovetail joints across layers. This reduces cost and allo...
The use of mass timber structural products in tall building applications (6–20 stories) is becoming more common around the world including North America. A potential concern is the environmental wetting of mass timber products during construction because such products may dry out more slowly than light-frame structural lumber, and wood, as an organic material, is susceptible to deterioration at elevated moisture contents. In order to better understand the moisture conditions present in high rise timber constructions, a long-term moisture monitoring program was implemented on an eight story, mixed-use, mass timber framed building in Portland, Oregon. The building was monitored with an array of moisture meters to track moisture content throughout the building’s construction and operation. This paper presents data covering a period just over one year starting from the manufacture of crosslaminated timber (CLT) panels. Hygrothermal properties of CLT samples of the same type used in the building were measured in the laboratory, and wetting and drying experiments on representative CLT samples were conducted. Simulated moisture contents using a one-dimensional hygrothermal model compared reasonably well with laboratory experiments and building site measurements.
International Conference on New Horizons in Green Civil Engineering
April 25-27,2018. Victoria, Canada
This paper presents preliminary findings from an ongoing research program instrumenting CLT buildings to measure wood moisture content. An overview of the research program is presented along with data from first year of moisture monitoring in an 8-story building in Portland, Oregon. This project measures the wood moisture content throughout the construction cycle, including the fabrication, shipping, staging, and erection of the panels. These preliminary field measurements can help characterize moisture changes in CLT during construction and guide the construction of future CLT buildings.
The intent of this project is to research evaluation and rehabilitation methods that are applicable to mass timber structures following a fire. This includes addressing both fire damage and water damage from sprinkler activation and/or the use of firefighting hoses. This report provides an overview of the type of damage that might be expected following a fire and methods that might reduce potential damage (including design elements and firefighting tactics). Current and existing rehabilitation methods for wood construction will be reviewed and their applicability to mass timber structures will be discussed. This includes the ability to conduct condition assessments and repairs on building elements that can be done in place. The overall objective is to reduce uncertainty related to mass timber construction, which ultimately would allow for more accurate risk evaluation by insurance companies.
This report summarizes basic wood-moisture relationships, and reviews conditions conducive to adverse consequences of wetting, such as staining, mold growth, decay, strength reduction, and dimensional change and distortion. It also outlines solutions and available resources related to on-site moisture management and design measures.
Cross-laminated timber (CLT) was developed in Europe for the prefabricated construction of wall, roof, and flooring elements. Adaption of CLT for use in the United States requires consideration of the different climates, building codes, and construction methods in this country. ... This Chapter provides guidance on hear, air, and moisture control in wall and roof assemblies that utilize CLT panels in U.S. climate zones. The overarching strategies are to prevent wetting of CLT panels by using drained wall systems, to control airflow using an air barrier on the exterior of the CLT panels, to place rigid insulation to the exterior of the panels, to prevent moisture from accumulating within the panels, and to allow the panels to dry should they get wet. In certain climates, preservative treatment of CLT is recommended to provide additional protection against potential hazards such as decay and termites. ...
To investigate the wetting and drying behaviour of the face and edge surfaces of cross-laminated timber (CLT), including edge-to-edge joints covered with plywood spline
To evaluate effectiveness of water-repellent coatings and membranes that are factory-applied with the intent to prevent wetting caused by rain, installation of wet light-weight concrete topping, or contact with damp concrete surfaces
To assess potential impact of fire protection measures including drywall and rigid mineral wood insulatio on the drying performance of wet CLT
To further develop practical solutions for on-site management of mass timber construction