A. Shop Drawings and Details for Tests
B. Sound and Impact Test Results Summary
C. Test 1: Sound and Impact Transmission Test - CLT
D. Test 2: Sound and Impact Transmission Test - Concrete Topping
E. Test 3a: Sound and Impact Transmission Test - Marmoleum
F. Test 3b: Sound and Impact Transmission Test - Marmoleum
G. Test 4: Sound and Impact Transmission Test - Carpet
H. Test 5a: Sound and Impact Transmission Test - Luxury Vinyl Plank
I. Test 5b: Sound and Impact Transmission Test - Luxury Vinyl Plank
J. Test 6: Sound and Impact Transmission Test - Mechanical Roof
Cross-laminated timber (CLT) was developed in Europe for the prefabricated construction of wall, roof, and flooring elements. Adaption of CLT for use in the United States requires consideration of the different climates, building codes, and construction methods in this country. ... This Chapter provides guidance on hear, air, and moisture control in wall and roof assemblies that utilize CLT panels in U.S. climate zones. The overarching strategies are to prevent wetting of CLT panels by using drained wall systems, to control airflow using an air barrier on the exterior of the CLT panels, to place rigid insulation to the exterior of the panels, to prevent moisture from accumulating within the panels, and to allow the panels to dry should they get wet. In certain climates, preservative treatment of CLT is recommended to provide additional protection against potential hazards such as decay and termites. ...
Design, Fabrication and Operation Proposals for Glued-Laminated Timber, Based on Measuring and Modelling Results, Chapter 1: Literature Review and the Results of Examinations of the Spoil of the Glue Laminated Timber Beams
The paper deals with the experimental analysis focused on the determination of strain in wooden building structures using optical fibers with FBG sensors. Firstly, optical fibers were used to measure displacements of layers and surface strain of the...
This document aims to emphasize the importance of an appropriate level of on-site moisture management for wood construction, depending on weather conditions, construction methods, and assemblies used. It covers three different but related research projects. It first describes baseline moisture contents (MCs) measured from...