Skip header and navigation

6 records – page 1 of 1.

Comparison of Environmental Performance of a Five-Storey Building Built with Cross-Laminated Timber and Concrete

https://research.thinkwood.com/en/permalink/catalogue65
Year of Publication
2012
Topic
Energy Performance
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems

Connection and Performance of Two-Way CLT Plates

https://research.thinkwood.com/en/permalink/catalogue1482
Year of Publication
2018
Topic
Mechanical Properties
Connections
Material
CLT (Cross-Laminated Timber)
Application
Floors
Roofs
Author
Chao Zhang
George Lee
Frank Lam
Organization
University of British Columbia
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Floors
Roofs
Topic
Mechanical Properties
Connections
Keywords
Two-Way
Bending Test
Modulus of Elasticity
Self-Tapping Screws
Glued-In-Rod
Steel Connectors
Steel Plates
Language
English
Research Status
Complete
Abstract
The two-way action of Cross Laminated Timber (CLT) is often ignored in the design of CLT due to its complexity. But in some cases, for example, large span timber floor/roof, the benefit of taking the two-way action into account may be considerable since it is often deflection controlled in the design...
Online Access
Free
Resource Link
Less detail

Connection and Performance of Two-Way CLT Plates Phase II

https://research.thinkwood.com/en/permalink/catalogue2086
Year of Publication
2019
Topic
Mechanical Properties
Connections
Material
CLT (Cross-Laminated Timber)
PSL (Parallel Strand Lumber)
LVL (Laminated Veneer Lumber)
Application
General Application
Author
Chao Zhang
Julian Asselstine
George Lee
Frank Lam
Organization
University of British Columbia
Year of Publication
2019
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
PSL (Parallel Strand Lumber)
LVL (Laminated Veneer Lumber)
Application
General Application
Topic
Mechanical Properties
Connections
Keywords
Deflection
Two-Way
Bending
Finite Element Method
Model
Language
English
Research Status
Complete
Abstract
In Phase I of Developing Large Span Two Way CLT Floor System (2017-18) we studied the performance of a steel plate connection system for the minor direction of CLT plates. The connected specimens had higher stiffness and strength compared to intact members under bending. In Phase II (2018-19) we designed and tested another connector based on...
Online Access
Free
Resource Link
Less detail

Connections for Stackable Heavy Timber Modules in Midrise to Tall Wood Buildings

https://research.thinkwood.com/en/permalink/catalogue2087
Year of Publication
2019
Topic
Connections
Design and Systems
Seismic
Material
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Chao Zhang
George Lee
Frank Lam
Organization
University of British Columbia
Year of Publication
2019
Country of Publication
Canada
Format
Report
Material
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Connections
Design and Systems
Seismic
Keywords
Modular
Intra-module Connection
Inter-module Vertical Connection
Inter-module horizontal Connection
Mid-Rise
Tall Wood
Screws
Load Transfer
Steel Angle Bracket
Stiffness
Strength
Ductility
Language
English
Research Status
Complete
Abstract
In Phase I (2018-19) of this project on Prefabricated Heavy Timber Modular Construction, three major types of connections used in a stackable modular building were studied: intramodule connection, inter-module vertical connection, and inter-module horizontal connection. The load requirement and major design criteria were identified...
Online Access
Free
Resource Link
Less detail

Force Based Design Guideline for Timber-Steel Hybrid Structures: Steel Moment Resisting Frames with CLT Infill Walls

https://research.thinkwood.com/en/permalink/catalogue83
Year of Publication
2015
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Solomon Tesfamariam
Siegfried Stiemer
Matiyas Bezabeh
Caleb Goertz
Marjan Popovski
Katsuichiro Goda
Organization
University of British Columbia
Year of Publication
2015
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Design and Systems
Seismic
Keywords
Overstrength
Ductility
National Building Code of Canada
Timber-Steel Hybrid
Office Buildings
Residential Buildings
Language
English
Research Status
Complete
Abstract
Provincial code changes have been made to allow construction of light wood-frame buildings up to 6 storeys in order to satisfy the urban housing demand in western Canadian cities. It started in 2009 when the BC Building Code was amended to increase the height limit for wood-frame structures from four to six. Recently, provinces of Quebec, Ontario and Alberta followed suit. While wood-frame construction is limited to six storeys, some innovative wood-hybrid systems can go to greater heights. In this report, a feasibility study of timber-based hybrid buildings is described as carried out by The University of British Columbia (UBC) in collaboration with FPInnovations. This project, funded through BC Forestry Innovation Investment's (FII) Wood First Program, had an objective to develop design guidelines for a new steel-timber hybrid structural system that can be used as part of the next generation "steel-timber hybrid structures" that is limited in scope to 20 storey office or residential buildings. ...
Online Access
Free
Resource Link
Less detail

Study of Massive Timber Walls based on NLT and Post Laminated LVL

https://research.thinkwood.com/en/permalink/catalogue1585
Year of Publication
2018
Topic
Connections
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
NLT (Nail-Laminated Timber)
Application
Shear Walls
Author
Chao Zhang
George Lee
Frank Lam
Organization
University of British Columbia
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
LVL (Laminated Veneer Lumber)
NLT (Nail-Laminated Timber)
Application
Shear Walls
Topic
Connections
Mechanical Properties
Keywords
Shear Tests
Glue Lines
Lateral Loading
Sheathing
Load Carrying Capacity
Stiffness
Energy Dissipation
Shear Strength
Language
English
Research Status
Complete
Abstract
Currently the massive timber shear walls are mainly made from Cross Laminated Timber (CLT), which possesses a high in-plane shear strength and rigidity. But only part of its elements (mainly the vertically aligned laminae) are engaged in carrying the vertical load and that could be a limitation when designing taller timber structures or wherever higher...
Online Access
Free
Resource Link
Less detail

6 records – page 1 of 1.