Skip header and navigation

Refine Results By

10 records – page 1 of 1.

Accelerated Curing of Large Scale Glued-in-Rods

https://research.thinkwood.com/en/permalink/catalogue2018
Year of Publication
2018
Topic
Mechanical Properties
Connections
Material
LVL (Laminated Veneer Lumber)

Accuracy Evaluation of Gamma-Method for Deflection Prediction of Partial Composite Beams

https://research.thinkwood.com/en/permalink/catalogue1911
Year of Publication
2018
Topic
Mechanical Properties
Design and Systems
Material
Timber-Concrete Composite
Application
Wood Building Systems
Beams

Accurate Strength Parameters for Fasteners with Examples for Ring Shank Nails

https://research.thinkwood.com/en/permalink/catalogue1510
Year of Publication
2016
Topic
Connections
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
Author
Munch-Andersen, Jørgen
Svensson, Staffan
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Topic
Connections
Mechanical Properties
Keywords
Withdrawal Test
Ring Shank Nails
Fasteners
Strength
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 344-352
Summary
Strength parameters for fasteners determined in accordance with the methods prescribed for the European CE-marking leads to quite different values for seemingly similar products from different manufactures. The results are hardly repeatable, to some extent due to difficulties in selecting representative timber samples for the testing. Beside this uncertainty, the declared values available to the designer concerns only structural timber, so no strength parameters are available for common engineered wood products such as LVL or plywood
Online Access
Free
Resource Link
Less detail

Achieving Sustainable Urban Buildings with Seismically Resilient Mass Timber Core Wall and Floor System

https://research.thinkwood.com/en/permalink/catalogue2802
Topic
Design and Systems
Seismic
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Cores
Walls
Floors
Wood Building Systems
Organization
Portland State University
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Cores
Walls
Floors
Wood Building Systems
Topic
Design and Systems
Seismic
Keywords
Hold-Down
Seismic Performance
Core Walls
Parametric Analysis
Deformation Capacity
Overstrength
Mid-Rise
High-Rise
Tall Wood Buildings
Research Status
In Progress
Notes
Project contact is Peter Dusicka at Portland State University
Summary
The urgency in increasing growth in densely populated urban areas, reducing the carbon footprint of new buildings, and targeting rapid return to occupancy following disastrous earthquakes has created a need to reexamine the structural systems of mid- to high-rise buildings. To address these sustainability and seismic resiliency needs, the objective of this research is to enable an all-timber material system in a way that will include architectural as well as structural considerations. Utilization of mass timber is societally important in providing buildings that store, instead of generate, carbon and increase the economic opportunity for depressed timber-producing regions of the country. This research will focus on buildings with core walls because those building types are some of the most common for contemporary urban mid- to high-rise construction. The open floor layout will allow for commercial and mixed-use occupancies, but also will contain significant technical knowledge gaps hindering their implementation with mass timber. The research plan has been formulated to fill these gaps by: (1) developing suitable mid- to high-rise archetypes with input from multiple stakeholders, (2) conducting parametric system-level seismic performance investigations, (3) developing new critical components, (4) validating the performance with large-scale experimentation, and (5) bridging the industry information gaps by incorporating teaching modules within an existing educational and outreach framework. Situated in the heart of a timber-producing region, the multi-disciplinary team will utilize the local design professional community with timber experience and Portland State University's recently implemented Green Building Scholars program to deliver technical outcomes that directly impact the surrounding environment. Research outcomes will advance knowledge at the system performance level as well as at the critical component level. The investigated building system will incorporate cross laminated timber cores, floors, and glulam structural members. Using mass timber will present challenges in effectively achieving the goal of desirable seismic performance, especially seismic resiliency. These challenges will be addressed at the system level by a unique combination of core rocking combined with beam and floor interaction to achieve non-linear elastic behavior. This system behavior will eliminate the need for post-tensioning to achieve re-centering, but will introduce new parameters that can directly influence the lateral behavior. This research will study the effects of these parameters on the overall building behavior and will develop a methodology in which designers could use these parameters to strategically control the building seismic response. These key parameters will be investigated using parametric numerical analyses as well as large-scale, sub-system experimentation. One of the critical components of the system will be the hold-down, a device that connects the timber core to the foundation and provides hysteretic energy dissipation. Strength requirements and deformation demands in mid- to high-rise buildings, along with integration with mass timber, will necessitate the advancement of knowledge in developing this low-damage component. The investigated hold-down will have large deformation capability with readily replaceable parts. Moreover, the hold-down will have the potential to reduce strength of the component in a controlled and repeatable way at large deformations, while maintaining original strength at low deformations. This component characteristic can reduce the overall system overstrength, which in turn will have beneficial economic implications. Reducing the carbon footprint of new construction, linking rural and urban economies, and increasing the longevity of buildings in seismic zones are all goals that this mass timber research will advance and will be critical to the sustainable development of cities moving forward.
Resource Link
Less detail

Acoustic Performance of All-Wood Floor Systems

https://research.thinkwood.com/en/permalink/catalogue1931
Year of Publication
2017
Topic
Acoustics and Vibration
Material
Light Frame (Lumber+Panels)
Application
Floors
Organization
APA
Year of Publication
2017
Country of Publication
United States
Format
Report
Material
Light Frame (Lumber+Panels)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Sound Transmission Class
Impact Isolation Class
Code
Language
English
Research Status
Complete
Online Access
Free
Resource Link
Less detail

Acoustic Performance of Timber and Timber-Concrete Composite Floors

https://research.thinkwood.com/en/permalink/catalogue684
Year of Publication
2014
Topic
Acoustics and Vibration
Material
LVL (Laminated Veneer Lumber)
Timber-Concrete Composite
Application
Floors
Author
Schluessel, Marc
Shrestha, Rijun
Crews, Keith
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Timber-Concrete Composite
Application
Floors
Topic
Acoustics and Vibration
Keywords
New Zealand
Australia
Building Code of Australia
Sound Insulation
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
A major problem in light-weight timber floors is their insufficient performance coping with impact noise in low frequencies. There are no prefabricated solutions available in Australia and New Zealand. To rectify this and enable the implementation of light-weight timber floors, a structural floor was designed and built in laminated veneer lumber (LVL). The floor was evaluated in a laboratory setting based on its behaviour and then modified with suspended ceilings and different floor toppings. Twenty-nine different floor compositions were tested. The bare floor could not reach the minimum requirement set by the Building Code of Australia (BCA) but with additional layers, a sufficient result of R'w+Ctr 53 dB and L’nT,w + CI 50 dB was reached. Doubling of the concrete mass added a marginal improvement. With concrete toppings and suspended ceiling it is possible to reach the goal in airborne and impact sound insulation. The best result was achieved by combining of additional mass and different construction layers.
Online Access
Free
Resource Link
Less detail

Acoustic Testing of CLT and Glulam Floor Assemblies

https://research.thinkwood.com/en/permalink/catalogue1863
Year of Publication
2016
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Author
Sabourin, Ivan
Organization
National Research Council of Canada
Publisher
Regupol America
Year of Publication
2016
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Transmission Loss
Impact Sound Transmission
Impact Sound Pressure Level
Language
English
Research Status
Complete
Series
Nordic Engineered Wood Report
Online Access
Free
Resource Link
Less detail

Actuarial Contribution to the Understanding of Insurable Risks Related to Non-residential High-rise Buildings in CLT

https://research.thinkwood.com/en/permalink/catalogue2194
Topic
Market and Adoption
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Organization
Université Laval
Country of Publication
Canada
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Market and Adoption
Keywords
High-Rise
Non-Residential
Course of Construction Insurance
Research Status
In Progress
Notes
Project contact is Étienne Marceau at Université Laval
Summary
The objective of this project is to identify the risk factors taken into account in the pricing of an insurance contract for a construction site. This project aims to synthesize the quantitative approaches used in practice and presented in academic research for the pricing of home insurance and commercial insurance. Then, we aim to identify the preventive measures that can be taken to reduce the impact of different perils in the insurance of a construction site in wood or other.
Less detail

Adaptation of Advanced High R-Factor Bracing Systems into Heavy Timber Frames

https://research.thinkwood.com/en/permalink/catalogue1760
Year of Publication
2016
Topic
Seismic
Design and Systems
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Frames
Author
Gilbert, Colin
Erochko, Jeffrey
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Frames
Topic
Seismic
Design and Systems
Mechanical Properties
Keywords
Quasi-Static
Cyclic Testing
Ductility
Damping Devices
R-factors
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5068-5077
Summary
Timber provides attractive earthquake performance characteristics for regions of high seismic risk, particularly its high strength-to-weight ratio; however, current timber structural systems are associated with relatively low design force reduction factors due to their low inherent ductility when compared to high-performance concrete and steel...
Online Access
Free
Resource Link
Less detail

Adhesive-Bonded Timber-Concrete Composites - Experimental Investigation of Thermal-Hygric Effects

https://research.thinkwood.com/en/permalink/catalogue1519
Year of Publication
2016
Topic
Serviceability
Mechanical Properties
Material
Timber-Concrete Composite
Author
Seim, Werner
Eisenhut, Lars
Kühlborn, Sonja
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Concrete Composite
Topic
Serviceability
Mechanical Properties
Keywords
Climate
Long-term
Shear Strength
Deformation
Temperature
Moisture Content
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 597-605
Summary
The advantages of the two different building construction materials, timber and concrete, can be used effectively in adhesive-bonded timber-concrete composite constructions. The long-term behavior was investigated experimentally on small-scale shear and bond specimens under artificial, alternating climatic conditions and on fullscale specimens under natural climatic conditions for an application in construction practice. The development of the shear strength and the deformation behavior under permanent loads were studied, focusing on the different material behavior of wood and concrete regarding changes in temperature and moisture. The general applicability of adhesivebonded timber-concrete composites in construction practice was proved in the investigations.
Online Access
Free
Resource Link
Less detail

10 records – page 1 of 1.