Project contact is Jianhui Zhou at the University of Northern British Columbia
Building acoustics has been identified as one of the key subjects for the success of mass timber in the multi-storey building markets. The project will investigate the acoustical performance of mass timber panels produced in British Columbia. The apparent sound transmission class (ASTC) and impact insulation class (AIIC) of bare mass timber elements as wall and/ or floor elements will be measured through a lab mock-up. It is expected that a database of the sound insulation performance of British Columbia mass timber products will be developed with guidance on optimal acoustical treatments to achieve different levels of performance.
Project contact is Étienne Marceau at Université Laval
The objective of this project is to identify the risk factors taken into account in the pricing of an insurance contract for a construction site. This project aims to synthesize the quantitative approaches used in practice and presented in academic research for the pricing of home insurance and commercial insurance. Then, we aim to identify the preventive measures that can be taken to reduce the impact of different perils in the insurance of a construction site in wood or other.
Project contacts are Frederico França at Mississippi State University and Robert J. Ross at the Forest Products Laboratory
With the rapid development of CLT manufacturing capacity around the world and the increasing architectural acceptance and adoption, there is a current and pressing need regarding adhesive bond quality assurance in manufacturing. As with other engineered glued composites, adhesive bondline performance is critically important. Bondline assessment requires technology in the form of sensors, ultrasonics, load cells, or other means of reliable machine evaluation.
The objectives of this cooperative study are to develop quality assurance procedures for monitoring the quality of mass timber and CLT during and after manufacturing and to develop assessment techniques for CLT panels in-service.
Project contact is Keri Ryan at University of Nevada, Reno
A landmark shake table test of a 10-story mass timber building will be conducted in late 2020. The test program, funded by other sources, will help accelerate the adoption of economically competitive tall timber buildings by validating the seismic performance of a resilient cross-laminated timber (CLT) rocking wall system. In this project, we leverage and extend the test program by including critical nonstructural components and systems (NCS). Including NCSs, which are most vulnerable to rocking induced deformations of the CLT core, allows investigation of the ramification of this emerging structural type on building resiliency. Quantifying interactions amongst vertically and horizontally spanning NCSs during earthquake shaking will allow designers to develop rational design strategies for future installation of such systems. The expected research outcomes are to expand knowledge of rocking wall system interactions with various NCS, identify NCS vulnerabilities in tall timber buildings, and develop solutions to address these vulnerabilities. Moreover, this effort will greatly increase visibility of the test program. The results of this research will be widely disseminated to timber design and NCS communities through conference presentations, online webinars, and distribution to publicly accessible research repositories.
Project contact is Hongmei Gu at the Forest Products Laboratory
The FPL team is in charge of developing a full comparative LCA study for three multiple-story mass timber buildings and their concrete alternatives in the U.S. Northeast region, with Boston as the point location. Using these three comparative LCAs, this research will determine the GHG emissions reduction potential from mass timber use in the building sector for the U.S. region. This may increase potential for growth in wood utilization, timber harvest, and forest management practices through the market demands.
Project contact is Thomas Miller at Oregon State University
Understanding how roof and floor systems (commonly called diaphragms by engineers) that are built from Pacific Northwest-sourced cross-laminated timber (CLT) panels perform in earthquake prone areas is a critical area of research. These building components are key to transferring normal and extreme event forces into walls and down to the foundation. The tests performed in this project will provide data on commonly used approaches to connecting CLT panels within a floor or roof space and the performance of associated screw fasteners. Structural engineers will directly benefit through improved modeling tools. A broader benefit may be increased confidence in the construction of taller wood buildings in communities at greater risk for earthquakes.
The objectives of this project are to develop a design methodology and to demonstrate performance for exterior bearing CLT walls used in buildings subject to force protection requirements. This methodology should be published by U.S. Army Corp of Enginee...
Project contact is Chris Pantelides at the University of Utah
A mass timber buckling-restrained braced frame is proposed to enhance the seismic resilience of mass timber buildings. Constructed using wood generated from the national forest system, the mass timber buckling-restrained brace will be integrated with a mass timber frame for structural energy dissipation under seismic or wind loads. The team will improve and optimize the design of structural components based on feedback from a real-time health monitoring system. Outcomes include guidelines for a lateral force resisting system of mass timber buildings in high seismic or wind regions.
Project contact is Paulo Tabares at the Colorado School of Mines
Cross Laminated Timber (CLT) is a mass timber material that has the potential to expand the wood building market in the U.S. However, new sustainable building technologies need extensive field and numerical validation quantifying environmental and economic benefits of using CLT as a sustainable building material so it can be broadly adopted in the building community. These benefits will also be projected nationwide across the United States once state-of-the-art software is validated and will include showcasing and documenting synergies between multiple technologies in the building envelope and heating, ventilation and air conditioning (HVAC) systems. However, there are no such studies for CLT. The objective of this project is to quantify and showcase environmental and economic benefits of CLT as a sustainable building material in actual (and simulated) commercial buildings across the entire United States by doing: (1) on-site monitoring of at least four CLT buildings, (2) whole building energy model validation, (3) optimization of the performance and design for CLT buildings and (4) comparison with traditional building envelopes. This knowledge gap needs to be filled to position CLT on competitive grounds with steel and concrete and is the motivation for this study.
Structural engineered woods require the use of previously evaluated structural adhesives in accordance with a variety of standard methods (ASTM D2559, ASTM D7247, CSA O112.9, CSA O112.10, CSA O177, etc.). The basic assumption is that a bonded engineered wood product will have a performance equivalent to, or better than, the non-bonded product it replaces, regardless of the conditions of use (dry, wet, fire, etc.). Nevertheless, the results of cross-laminated wood (CLT) fire tests have shown that the requirements currently imposed on adhesives do not allow to limit lamellae detachment when CLT is exposed to fire. Traditionally, this behavior is not observed for glulam. It is essential to review the classification and performance criteria imposed on adhesives by submitting them to the various tests currently standardized. The analysis of the results may also be used to develop a new test method for adhesives exposed to high temperatures, depending on the anticipated use of the engineered wood product.