The Canterbury earthquakes in 2010 and 2011 caused significant damage to the Christchurch building stock. However, it is an opportunity to build more comfortable and energy efficient buildings. Previous research suggests a tendency to both under heat and spot heat, meaning that New Zealand dwellings are partly heated and winter indoor temperatures do not always meet the recommendations of the World Health Organization. Those issues are likely to be explained by design deficiency, poor thermal envelope, and limitations of heating systems.
In that context, the thesis investigates the feasibility of building an energy efficient and cost-competitive house in Christchurch. Although capital costs for an energy efficient house are inevitably higher, they are balanced with lower operating costs and improved thermal comfort. The work is supported by a residential building project using Cross Laminated Timber (CLT) panels. This atypical project is compared with a typical New Zealand house (reference building), regarding both energy efficiency and costs.
The current design of the CLT building is discussed according to passive design strategies, and a range of improvements for the building design is proposed. This final design proposal is determined by prioritizing investments in design options having the greatest effect on the building overall energy consumption. Building design features include windows efficiencies, insulation levels, optimized thermal mass, lighting fixture, as well as HVAC and domestic hot water systems options. The improved case for the CLT building is simulated having a total energy consumption of 4,860kWh/year, which corresponds to a remarkable 60% energy savings over the baseline.
The construction cost per floor area is slightly higher for the CLT building, about 2,900$/m² against
2,500$/m² for the timber framed house. But a life cycle cost analysis shows that decreased operating costs makes the CLT house cost-competitive over its lifetime. The thesis suggests that the life cycle cost of the CLT house is 14% less than that of the reference building, while the improved CLT design reaches about 22% costs savings.
The development and use of tornado shelters have helped reduce loss of human life associated with extreme weather events. Currently, the majority of shelters are built from either steel or concrete. The development of the crosslaminated timber (CLT) industry in the United States has provided an ideal wood product to resist the debris impact...
Hybrid structural systems assembled connecting steel elements and cross-laminated timber panels (CLT) can be a valid alternative to traditional systems in the construction of residential buildings. Such systems can combine the industrialized construction...
Cross-laminated timber (CLT) is a very efficient and powerful building material and thus recently discovered for the erection of multi-storey timber towers. In our paper, we focus on building science and services related topics regarding these constructi...
New Zealand Society for Earthquake Engineering Conference
April 26-28, 2013, Wellington, New Zealand
This paper describes options for seismic design of pre-fabricated timber core-wall systems, used as stairwells and lift shafts for lateral load resistance in multi-storey timber buildings. The use of Cross-Laminated Timber (CLT) panels for multi-storey timber buildings is gaining popularity throughout the world, especially for residential construction...
More and more people live in cities. The building industry is responsible for 33% of waste production and is set to increase further to 50% in 2025. The energy efficiency is continuously increased, but the waste production at the end of life of a building is largely ignored. This design proposes a solution in the form of a zero-waste high-rise design. It uses only recyclable or renewable materials. Mass-timber is chosen as the main material as it is not only renewable and easily reusable, it is also a storage of CO2. The design reuses the foundation of existing buildings, and with the lightweight properties of mass-timber, increases the density on the location by building taller. The design is four times taller as the current buildings. To allow for sustainable densification, the design offers public and collective qualities. The building has been designed is such a way to be easily refitted during its life cycle or to be completely disassembled at the end of life.