Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: Structural Performance of Post-Tensioned CLT Shear Walls with Energy Dissipators
The latest developments in seismic design philosophy have been geared towards developing of so called "resilient" or "low damage" innovative structural systems that can reduce damage to the structure while offering the same or higher levels of safety to occupants. One such innovative structural system is the Pres-Lam system that is a wood-hybrid system that utilizes post-tensioned (PT) mass timber components in both rigid-frame and wall-based buildings along with various types of energy disspators. To help implement the Pres-Lam system in Canada and the US, information about the system performance made with North American engineered wood products is needed. That information can later be used to develop design guidelines for the designers for wider acceptance of the system by the design community.Several components influence the performance of the Pres-Lam systems: the load-deformation properties of the engineered wood products under compression, load-deformation and energy dissipation properties of the dissipators used, placement of the dissipators in the system, and the level of post-tensioning force. The influence of all these components on the performance of Pres-Lam wall systems under gravity and lateral loads was investigated in this research project. The research project consisted of two main parts: material tests and system tests.
Cross-laminated timber (CLT) is a relatively new type of massive timber system that has shown to possess excellent mechanical properties and structural behavior in building construction. When post-tensioned with high-strength tendons, CLT panels perform ...
In this paper, an innovative pin-supported CLT shear wall system equipped with low-yield-strength steel dampers was proposed. The system consisted of a pair of energy dissipating, CLT shear wall panels connected by lowyield-strength steel dampers. With pin connections at the base of the system, the steel dampers were assumed to act the...
Cross-laminated timber (CLT) is an engineered wood material that was introduced in the last decade as a promising candidate for building wood structures higher than 10 stories. Thus far, a handful of tall residential CLT buildings have been built in low seismic regions around the world...
+Shear+Wall+System+Equipped+with+Low-Yield+Steel+Dampers){kind=link}
