Skip header and navigation

7 records – page 1 of 1.

Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: In-Situ Testing of the Origine 13-Storey Building for Vibration and Acoustic Performances

https://research.thinkwood.com/en/permalink/catalogue1474
Year of Publication
2018
Topic
Acoustics and Vibration
Serviceability
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Floors
Walls
Author
Lin Hu
Samuel Cuerrier-Auclair
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Floors
Walls
Topic
Acoustics and Vibration
Serviceability
Keywords
Origine
Natural Frequencies
Damping Ratios
Sound Insulation
Ambient Vibration Tests
Static Deflection
Apparent Sound Transmission Class
Apparent Impact Insulation Class
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Serviceability performance studied covers three different performance attributes of a building. These attributes are 1) vibration of the whole building structure, 2) vibration of the floor system, typically in regards to motions in a localized area within the entire floor plate, and 3) sound insulation performance of the wall and floor assemblies...
Online Access
Payment Required
Resource Link
Less detail

Advanced Wood-Based Solutions for Mid-Rise and High-Rise Construction: Proposed Vibration-Controlled Design Criterion for Supporting Beams

https://research.thinkwood.com/en/permalink/catalogue1178
Year of Publication
2018
Topic
Acoustics and Vibration
Mechanical Properties
Application
Floors
Author
Lin Hu
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Application
Floors
Topic
Acoustics and Vibration
Mechanical Properties
Keywords
Floor Supporting Beam
Bending Stiffness
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
For wood floor systems, their vibration performance is significantly dependent on the conditions of their supports, specifically the rigidity of the support. Detrimental effects could result if the floor supports do not have sufficient rigidity. This is special ture for floor supporting beams. The problem of vibrating floor due to flexible...
Online Access
Payment Required
Resource Link
Less detail

Chapter 7: Vibration Performance of Cross-Laminated Timber Floors

https://research.thinkwood.com/en/permalink/catalogue813
Year of Publication
2011
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Lin Hu
Sylvain Gagnon
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Deflection
Natural Frequency
Vibration Controlled Spans
Uniformly Distributed Load
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Cross-laminated timber (CLT) is proving to be a promising solution for wood to compete in building sectors where steel and concrete have traditionally predominated. Studies at FPInnovations found that bare CLT floor systems differ from traditional lightw...
Online Access
Free
Resource Link
Less detail

Chapter 7: Vibration Performance of Cross-Laminated Timber Floors

https://research.thinkwood.com/en/permalink/catalogue826
Year of Publication
2013
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Lin Hu
Ying Hei Chui
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Deflection
Vibration Controlled Spans
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
Cross-laminated timber (CLT) is proving to be a promising solution for wood to compete in building sectors where steel and concrete have traditionally predominated. Studies at FPInnovations found that bare CLT floor systems differ from traditional lightweight wood joisted floors with typical mass around 4 lb./ft2 (20 kg/m2) and fundamental natural frequency above 15 Hz, and heavy concrete slab floors with a mass above 40 lb./ft2 (200 kg/m2) and fundamental natural frequency below 8 Hz. Based on FPInnovations' test results, bare CLT floors were found to have mass varying from approximately 6 lb./ft2 (30 kg/m2) to 30 lb./ft2 (150 kg/m2), and a fundamental natural frequency above 9 Hz. Due to these special properties, the existing standard vibration controlled design methods for lightweight and heavy floors may not be applicable for CLT floors. ...
Online Access
Free
Resource Link
Less detail

Chapter 9: Sound Insulation of Cross-Laminated Timber Assemblies

https://research.thinkwood.com/en/permalink/catalogue828
Year of Publication
2013
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Ceiling
Author
Lin Hu
David Adams
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Ceiling
Topic
Acoustics and Vibration
Keywords
Sound Insulation
International Building Code
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
The intent of this Chapter is to answer simple questions related to the definition of sound, its sources, quantification and methods of measurement, acceptable levels of sound, differences between sound and noise, etc. Of course, when verbalizing such questions, the solutions for sound control will be naturally unfolded to readers. This Chapter is intended to thoroughly separate myth from reality. The Chapter also introduces the International Building Code (IBC) requirements for sound insulation in buildings. State of the art construction details for CLT walls and floor/ceiling assemblies generally meeting IBC requirements are provided herein and are based on results of tests performed in various laboratories in the world and in the field by FPInnovations. A step by step construction practices guide then leads the reader towards the final goal, which is the occupants' satisfaction. We expect that after reading this Chapter, the reader will be in a position to acknowledge that CLT buildings can achieve satisfactory sound insulation levels if proper design and installation are followed. Note that, considering the short history of CLT construction, the journey is only beginning.
Online Access
Free
Resource Link
Less detail

Design Method for Controlling Vibrations of Wood-Concrete Composite Floors Systems

https://research.thinkwood.com/en/permalink/catalogue1689
Year of Publication
2016
Topic
Acoustics and Vibration
Design and Systems
Mechanical Properties
Material
Timber-Concrete Composite
Application
Floors
Author
Lin Hu
Samuel Cuerrier-Auclair
Ying Hei Chui
Redouane Ramzi
Sylvain Gagnon
Mohammad Mohammad
Chun Ni
Marjan Popovski
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Timber-Concrete Composite
Application
Floors
Topic
Acoustics and Vibration
Design and Systems
Mechanical Properties
Keywords
Natural Frequencies
Deflection
Bending Stiffness
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 4237-4245
Abstract
Wood-concrete composite slab floors provide a promising solution for achieving long spans and shallow wood-based floor systems for large and tall wood buildings. In comparison with conventional wood floor systems, such long span and heavy floors have a lower fundamental natural frequency...
Online Access
Free
Resource Link
Less detail

In-Situ Testing at Wood Innovation and Design Centre: Floor Vibration, Building Vibration, and Sound Insulation Performance

https://research.thinkwood.com/en/permalink/catalogue284
Year of Publication
2015
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Author
Lin Hu
Ciprian Pirvu
Redouane Ramzi
Organization
FPInnovations
Year of Publication
2015
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Topic
Acoustics and Vibration
Keywords
Natural Frequency
Damping Ratio
Static Deflection Testing
Vibration Performance
Sound Transmission
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
In order to address the lack of measured natural frequencies and damping ratios for wood and hybrid wood buildings, and lack of knowledge of vibration performance of innovative CLT floors and sound insulation performance of CLT walls and floors, FPInnovations conducted...
Online Access
Free
Resource Link
Less detail

7 records – page 1 of 1.