Skip header and navigation

16 records – page 1 of 2.

Analysis of Glue Line and Correlations Between Anatomical Characteristics of Eucalyptus grandis × Eucalyptus urophylla Glued-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue2435
Year of Publication
2019
Topic
Design and Systems
Material
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

An Innovative Method Based on Grain Angle Measurement to Sort Veneer and Predict Mechanical Properties of Beech Laminated Veneer Lumber

https://research.thinkwood.com/en/permalink/catalogue1286
Year of Publication
2018
Topic
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)

Bending Tests on Glued Laminated Timber Beams with Well-Known Material Properties

https://research.thinkwood.com/en/permalink/catalogue186
Year of Publication
2013
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Author
Fink, Gerhard
Kohler, Jochen
Frangi, Andrea
Organization
ETH Zurich
Year of Publication
2013
Country of Publication
Switzerland
Format
Report
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Topic
Mechanical Properties
Keywords
Bending Strength
Failure
Load Bearing Capacity
Four Point Bending Test
Density
Model
Bending Stiffness
Language
English
Research Status
Complete
Summary
At the Institute of Structural Engineering at the ETH Zurich numerous of investigations are conducted to analyse the load bearing capacity of glued laminated timber beams. The investigations are part of the research project ’Influence of varying material properties on the load bearing capacity of glued laminated timber (glulam)’. The investigations are taking place on 24 glulam beams with well-known material properties. The glulam beams are fabricated out of 400 timber boards. From those boards the material properties are investigated non-destructively within a former research project. During the glulam fabrication it is particularly focused to keep the information of the timber boards; i.e. after the glulam fabrication the position of each particular timber board within the glulam beam and thus the position of each particular knot is still known. The glulam beams are investigated during a 4-point bending test. On the glulam members the load bearing capacity, the bending stiffness and the density is measured. Furthermore local strains within the glulam beams are investigated using an optical coordinate-measurement device. Following the test the failure is investigated in detail. Hereby the type of failure (knot cluster, finger joint, clear wood) and the amount of failure (number of damaged lamellas) is documented. Afterwards the failed glulam beams are loaded again to analyse the remaining bending strength and the corresponding remaining bending stiffness. The major aim of the experimental analysis is the investigation of the load bearing capacity of glulam beams with well-known local material properties. The gained results can be used for an investigation of the influence of local weak zones, such as knot clusters or finger joints, on the load bearing capacity of glulam. In addition a data basis is produced to develop a new model (or to evaluate existing models) for the estimation of the load bearing capacity of glulam.
Online Access
Free
Resource Link
Less detail

The Charring Rate of Glulam Beams of Brazilian Wood Species

https://research.thinkwood.com/en/permalink/catalogue1771
Year of Publication
2016
Topic
Fire
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Author
Martins, Gisele
Munaiar Neto, Jorge
Calil Junior, Carlito
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Topic
Fire
Keywords
Charring Rate
Brazil
Density
Fire Test
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5302-5309
Summary
The combustibility of timber is one of the factors that restrict the use of structural elements of wood in buildings in Brazil. This paper describes an experimental investigation of the charring rate of wood species. The charring rate is one of the key parameters for the design of load bearing timber structures. The purpose of this study is...
Online Access
Free
Resource Link
Less detail

Comparison of Bonding Performance Between Plywood and Laminated Veneer Lumber Induced by High Voltage Electrostatic Field

https://research.thinkwood.com/en/permalink/catalogue2487
Year of Publication
2019
Topic
Mechanical Properties
Design and Systems
Material
LVL (Laminated Veneer Lumber)
Other Materials
Application
Wood Building Systems

Curved Cross Laminated Timber Elements

https://research.thinkwood.com/en/permalink/catalogue1545
Year of Publication
2016
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Author
Stecher, Georg
Maderebner, Roland
Zingerle, Philipp
Flach, Michael
Kraler, Anton
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Topic
Mechanical Properties
Keywords
Rolling Shear
Tensile Stress
Strength
Rigidity
Density
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 1131-1138
Summary
In timber construction, curved timber components have been used repeatedly. Yet the use of curved CLT elements is a relatively recent phenomenon. To obtain a European Technical Approval (ETA) for so-called radius timber (single curved CLT elements), Holzbau Unterrainer GmbH commissioned the accredited testing institution TVFA...
Online Access
Free
Resource Link
Less detail

Cyclic Performance of Connections used in Hybrid Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue1367
Year of Publication
2017
Topic
Connections
Design and Systems
Material
CLT (Cross-Laminated Timber)

Effect of Laminated Structure Design on the Mechanical Properties of Bamboo-Wood Hybrid Laminated Veneer Lumber

https://research.thinkwood.com/en/permalink/catalogue1407
Year of Publication
2017
Topic
Mechanical Properties
Design and Systems
Material
LVL (Laminated Veneer Lumber)
Other Materials

Estimation of Radio Frequency Electric Field Strength for Dielectric Heating of Phenol-Resorcinol-Formaldehyde Resin Used for Manufacturing Glulam

https://research.thinkwood.com/en/permalink/catalogue1505
Year of Publication
2014
Topic
Connections
Material
Glulam (Glue-Laminated Timber)
Author
Yang, Sang-Yun
Han, Yeonjung
Park, Yonggun
Eom, Chang-Deuk
Kim, Se-Jong
Kim, Kwang-Mo
Park, Moon-Jae
Publisher
The Korean Society of Wood Science Technology
Year of Publication
2014
Country of Publication
Korea
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Topic
Connections
Keywords
Adhesives
Phenol-Resorcinol Formaldehyde
Larch
High Frequency
Specific Heat
Density
Dielectric
Language
Korean
Research Status
Complete
Series
Journal of the Korean Wood Science and Technology
Online Access
Free
Resource Link
Less detail

Evaluation of Uniformity of Bamboo Bundle Veneer and Bamboo Bundle Laminated Veneer Lumber (BLVL)

https://research.thinkwood.com/en/permalink/catalogue2475
Year of Publication
2019
Topic
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
Other Materials
Author
Zhou, Haiying
Wei, Xin
Smith, Lee
Wang, Ge
Chen, Fuming
Publisher
MDPI
Year of Publication
2019
Country of Publication
Switzerland
Format
Journal Article
Material
LVL (Laminated Veneer Lumber)
Other Materials
Topic
Mechanical Properties
Keywords
Density
Light Transmittance
Stiffness
Language
English
Research Status
Complete
Series
Forests
Online Access
Free
Resource Link
Less detail

16 records – page 1 of 2.