Skip header and navigation

2 records – page 1 of 1.

Vibration and Sound Insulation Performance of Mass Timber Floors with Concrete Toppings

https://research.thinkwood.com/en/permalink/catalogue2548
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Ceilings
Organization
University of Northern British Columbia
Country of Publication
Canada
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Ceilings
Topic
Acoustics and Vibration
Keywords
Concrete Topping
Acoustic Membrane
Exposed Mass Timber Elements
Research Status
In Progress
Notes
Project contact is Jianhui Zhou at the University of Northern British Columbia
Summary
The impact sound perceived in the lower volume in a building is radiated by the vibration of the ceiling transmitted from the vibration of the floor generated by an impact source in the upper volume. Thus, the dynamic behaviour of a floor is one crucial intermediate step to understand the impact sound insulation performance of such a floor. A key to reducing the impact sound is to isolate the structural floor from the subfloor. Floating floor construction is a common way of improving the impact sound insulation, which is to float a concrete topping on the mass timber floor with an elastic layer in between. There are two types of floating floor solutions, a) with a continuous elastic layer and b) with point bearing elastic mounts as shown in Figure 1. This study will investigate both solutions and will provide guidance on how to adopt both solutions for mass timber floors with an exposed ceiling. The objectives of this project are: 1. To measure the sound insulation performance of mass timber floors with full-scale concrete topping on various continuous elastic interlayer materials 2. To measure the sound insulation performance of mass timber floors with full-scale concrete topping on discrete elastic load mounts
Less detail

Wood Design Manual 2017

https://research.thinkwood.com/en/permalink/catalogue2160
Year of Publication
2017
Topic
Design and Systems
Connections
Fire
Seismic
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
Glulam (Glue-Laminated Timber)
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
PSL (Parallel Strand Lumber)
Light Frame (Lumber+Panels)
DLT (Dowel Laminated Timber)
Application
General Application
Beams
Bridges and Spans
Columns
Floors
Ceilings
Arches
Shear Walls
Trusses
Walls