Skip header and navigation

2 records – page 1 of 1.

Mechanical Behaviour of Finger Joints at Elevated Temperatures

https://research.thinkwood.com/en/permalink/catalogue612
Year of Publication
2012
Topic
Fire
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Author
Frangi, Andrea
Bertocchi, Marco
Clauß, Sebastian
Niemz, Peter
Publisher
Springer-Verlag
Year of Publication
2012
Country of Publication
Germany
Format
Journal Article
Material
Glulam (Glue-Laminated Timber)
Topic
Fire
Mechanical Properties
Keywords
Fire Resistance
Tensile tests
Bending Tests
Finger Joints
Language
English
Research Status
Complete
Series
Wood Science and Technology
ISSN
1432-5225
Summary
Finger joints are commonly used to produce engineered wood products like glued laminated timber beams. Although comprehensive research has been conducted on the structural behaviour of finger joints at ambient temperature, there is very little information about the structural behaviour at elevated temperature. A comprehensive research project on the fire resistance of bonded timber elements is currently ongoing at the ETH Zurich. The aim of the research project is the development of simplified design models for the fire resistance of bonded structural timber elements taking into account the behaviour of the adhesive used at elevated temperature. The paper presents the results of a first series of tensile and bending tests on specimens with finger joints pre-heated in an oven. The tests were carried out with different adhesives that fulfil current approval criteria for the use in loadbearing timber components. The results showed substantial differences in temperature dependant strength reduction and failure between the different adhesives tested. Thus, the structural behaviour of finger joints at elevated temperature is strongly influenced by the behaviour of the adhesive used for bonding and may govern the fire design of engineered wood products like glued laminated timber beams.
Online Access
Free
Resource Link
Less detail

Chapter 6: Fire Damage of Wood Structures

https://research.thinkwood.com/en/permalink/catalogue897
Year of Publication
2012
Topic
Fire
Mechanical Properties
Material
Solid-sawn Heavy Timber
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Author
Kukay, Brian
White, Robert
Woeste, Frank
Publisher
International Code Council
Year of Publication
2012
Country of Publication
United States
Format
Book/Guide
Material
Solid-sawn Heavy Timber
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
Topic
Fire
Mechanical Properties
Keywords
Bending Tests
Withdrawal Tests
Load Bearing Capacity
Charring
Reduced Cross Section Method
Language
English
Research Status
Complete
Series
Inspection, Testing, and Monitoring of Buildings and Bridges
Summary
Depending on the severity, fire damage can compromise the structural integrity of wood structures such as buildings or residences. Fire damage of wood structures can incorporate several models that address (1) the type, cause, and spread of the fire, (2) the thermal gradients and fire-resistance ratings, and (3) the residual load capacity. The investigator should employ engineering judgment to identify those in-service members that are to be replaced, repaired, or can remain in-service as they are. Suchjudgment will likely be based on the visual inspection of damaged members, connections, and any protective membranes.
Online Access
Free
Resource Link
Less detail