Sustainability and innovation are key components in the fight against climate change. Mass timber buildings have been gaining popularity due to the renewable nature of timber. Although research comparing mass timber buildings to more mainstream buildings such as steel is still in the early stages and therefore, limited. We are looking to determine the difference between carbon footprints of mass timber and traditional steel and concrete buildings. This is done with the intention of determining the sustainability and practicality of mass timber buildings.
More and more people live in cities. The building industry is responsible for 33% of waste production and is set to increase further to 50% in 2025. The energy efficiency is continuously increased, but the waste production at the end of life of a building is largely ignored. This design proposes a solution in the form of a zero-waste high-rise design. It uses only recyclable or renewable materials. Mass-timber is chosen as the main material as it is not only renewable and easily reusable, it is also a storage of CO2. The design reuses the foundation of existing buildings, and with the lightweight properties of mass-timber, increases the density on the location by building taller. The design is four times taller as the current buildings. To allow for sustainable densification, the design offers public and collective qualities. The building has been designed is such a way to be easily refitted during its life cycle or to be completely disassembled at the end of life.
IOP Conference Series: Earth and Environmental Science
According to the predictions of United Nations (2017) there are more than 7 billion people on Earth and this number will reach 9.7 billion by 2050. Today, most of the population lives in the urban areas and the rapid growth entails more construction in a housing sector. Since the industrial revolution the world has experienced countless technological attainments and on the other hand risky increase in natural resources use, energy consumption, greenhouse gases emission, ozone depletion, toxification and global temperature rising. The question how the cities can respond to urban growth is related to the sustainable goals of Agenda 2030. This research discusses potential of the usage of timber as construction material and it also brings the answer to this question. The wood is 100% renewable, recyclable and nontoxic material with capacity to absorb CO2 and perform low embodied energy. The increase of timber use in the construction contributes to sustainable development and to the reduction of waste, CO2 emission, as well as energy consumption. The aim of this paper is to discuss the advantages of using timber as a sustainable solution in urban context, in comparison with most commonly used concrete. The findings demonstrate the value of timber as sustainable construction material.
Properly designed wooden truss bridges are environmentally compatible construction systems. The sharp decline in the erection of such structures in the past decades can be led back to the great effort needed for design and production. Digital parametric design and automated prefabrication approaches allow for a substantial improvement of the efficiency of design and manufacturing processes. Thus, if combined with a constructive wood protection following traditional building techniques, highly efficient sustainable structures are the result. The present paper describes the conceptual design for a wooden truss bridge drawn up for the overpass of a two-lane street crossing the university campus of one of Vienna’s main universities. The concept includes the greening of the structure as a shading design element. After an introduction, two Austrian traditional wooden bridges representing a good and a bad example for constructive wood protection are presented, and a state of the art of the production of timber trusses and greening building structures is given as well. The third part consists of the explanation of the boundary conditions for the project. Subsequently, in the fourth part, the conceptual design, including the design concept, the digital parametric design, the optimization, and the automated prefabrication concept, as well as the potential greening concept are discussed, followed by a summary and outlook on future research.
Katerra is a start-up construction company that has developed a vertically integrated cross-laminated timber (CLT) manufacturing supply chain and facility. Katerra commissioned the Carbon Leadership Forum (CLF) and the Center for International Trade in Forest Products (CINTRAFOR) at the University of Washington to perform a life cycle assessment (LCA) study to understand the environmental impacts and opportunities for impact reduction in Katerra’s CLT supply chain and manufacturing process. CINTRAFOR performed an LCA of the CLT supply chain and production process while the CLF performed a whole building LCA of a new building that used CLT produced at Katerra’s CLT facility.