Skip header and navigation

3 records – page 1 of 1.

Shear Connections with Self-Tapping-Screws for Cross-Laminated-Timber Panels

https://research.thinkwood.com/en/permalink/catalogue432
Year of Publication
2015
Topic
Connections
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Hossain, Afrin
Lakshman, Ruthwik
Tannert, Thomas
Organization
Structures Congress
Publisher
American Society of Civil Engineers
Year of Publication
2015
Country of Publication
United States
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Connections
Mechanical Properties
Keywords
Ductility
Self-Tapping Screws
Stiffness
Strength
Vertical Shear Loading
Mid-Scale
Quasi-Static
Shear Tests
Language
English
Conference
Structures Congress 2015
Research Status
Complete
Notes
April 23–25, 2015, Portland, Oregon, USA
Summary
Cross-Laminated-Timber (CLT) is increasingly gaining popularity in residential and non-residential applications in North America. To use CLT as lateral load resisting system, individual panels need to be connected. In order to provide in-plane shear connections, CLT panels may be joined with a variety of options including the use of self-tapping-screws (STS) in surface splines and half-lap joints. Alternatively, STS can be installed at an angle to the plane allowing for simple butt joints and avoiding any machining. This study investigated the performance of CLT panel assemblies connected with STS under vertical shear loading. The three aforementioned options were applied to join 3ply and 5-ply CLT panels. A total of 60 mid-scale quasi-static shear tests were performed to determine and compare the connection performance in terms of strength, stiffness, and ductility. It was shown that – depending on the screw layout – either very stiff or very ductile joint performance can be achieved.
Online Access
Payment Required
Resource Link
Less detail

System Solutions for Point Supported Wooden Flat Slabs

https://research.thinkwood.com/en/permalink/catalogue1784
Year of Publication
2016
Topic
Mechanical Properties
Connections
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Zingerle, Philipp
Maderebner, Roland
Flach, Michael
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Mechanical Properties
Connections
Keywords
Point-Supported
Stiffness
Load Carrying Capacity
Multi-Story
Reinforcement
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 5663-5668
Summary
The challenge with point-supported flat slabs is the stress concentration at the supporting points. The small strength of the wood perpendicular to the grain should not reduce the load carrying capacity of the CLT –Panels. Therefore, there are some existing state of the art methods of reinforcement with self-tapping screws, which open up the...
Online Access
Free
Resource Link
Less detail

Experimental Campaign for the Mechanical Characterization of Connection Systems in the Seismic Design of Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue1511
Year of Publication
2016
Topic
Connections
Mechanical Properties
Seismic
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Author
Casagrande, Daniele
Polastri, Andrea
Sartori, Tiziano
Loss, Cristiano
Chiodega, Manuela
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Topic
Connections
Mechanical Properties
Seismic
Keywords
Capacity
Stiffness
Ductility
Cyclic Loads
Monotonic Loads
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 353-361
Summary
The seismic behaviour of timber buildings is strongly related to the energy dissipation capacity of connections. According to Standard, since timber is characterized by a brittle failure when subjected to tensile or bending actions, the dissipative zones shall be located in joints and connections, whereas timber members themselves shall be regarded as behaving elastically. In order to ensure the global structural ductility, connections and joints shall be able to deform plastically at the associated ductility level without a significant reduction of their resistance under cyclic loads. The paper deals with an experimental campaign for the mechanical characterization of timber connection systems, commonly adopted in Europe, in the seismic design of timber buildings. The main objective was to find out the capacity, the stiffness and the ductility of the tested connections and to investigate their loss of capacity under cyclic loads. The obtained results were analysed in order to understand if the current provisions, reported in Standard for the different typology of traditional connectors, can be adopted in case of connection systems used for seismic purposes, such as hold-down or angle brackets. Their interaction with other structural parts was then investigated testing six fullscale timber walls, subjected to monotonic and cyclic loads. The tests were carried out at the Laboratory of Materials and Structural Testing of the Trento University (Italy).
Online Access
Free
Resource Link
Less detail