Skip header and navigation

Refine Results By

125 records – page 1 of 13.

Predicting the Human-Induced Vibration of Cross Laminated Timber Floor Under Multi-Person Loadings

https://research.thinkwood.com/en/permalink/catalogue2701
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Wang, Chang
Chang, Wen-Shao
Yan, Weiming
Huang, Haoyu
Publisher
ScienceDirect
Year of Publication
2021
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Human-Induced Vibration
Multi-Person Loadings
Numerical Modelling
Language
English
Research Status
Complete
Series
Structures
Summary
The vibration of cross laminated timber (CLT) floor is closely related to human-induced loadings. However, research and prediction approaches regarding human-induced vibration of the CLT floor have been mostly limited to a single-person excitation condition. This paper presents new prediction approaches to the vibration response of the CLT floor under multi-person loadings. The effect of multi-person loadings on the vibration performance of a CLT floor was investigated through numerical modelling, experimental testing and analytical investigation. A finite element model was developed through a computational software to perform an accurate analysis of human-induced loadings. An analytical model was established to predict human-induced vibration of the CLT floor under multi-person loadings. Experimental tests were conducted to validate the numerical modelling. Results of both numerical modelling and experimental testing showed that the vibration performance of the CLT floor under multi-person loadings was almost double that under single-person loadings. Thus, multi-person activities are more likely to cause the occupants feelings of discomfort. A method for predicting the human-induced vibration of the CLT floor under multi-person loadings was then developed. The measured response, numerical modelled response, and predicted response were compared using an existing design metric, vibration dose value (VDV). The results were largely consistent. It is therefore concluded that the proposed prediction method will enable engineers to design timber floor systems that consider multi-person loadings.
Online Access
Free
Resource Link
Less detail

Cyclic Response of Insulated Steel Angle Brackets Used for Cross-Laminated Timber Connections

https://research.thinkwood.com/en/permalink/catalogue2765
Year of Publication
2021
Topic
Seismic
Acoustics and Vibration
Connections
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Author
Kržan, Meta
Azinovic, Boris
Publisher
Springer
Year of Publication
2021
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Topic
Seismic
Acoustics and Vibration
Connections
Keywords
Angle Bracket
Sound Insulation
Insulation
Monotonic Test
Cyclic Tests
Wall-to-Floor
Stiffness
Load Bearing Capacity
Shear
Tensile
Language
English
Research Status
Complete
Series
European Journal of Wood and Wood Products
Summary
In cross-laminated timber (CLT) buildings, in order to reduce the disturbing transmission of sound over the flanking parts, special insulation layers are used between the CLT walls and slabs, together with insulated angle-bracket connections. However, the influence of such CLT connections and insulation layers on the seismic resistance of CLT structures has not yet been studied. In this paper, experimental investigation on CLT panels installed on insulation bedding and fastened to the CLT floor using an innovative, insulated, steel angle bracket, are presented. The novelty of the investigated angle-bracket connection is, in addition to the sound insulation, its resistance to both shear as well as uplift forces as it is intended to be used instead of traditional angle brackets and hold-down connections to simplify the construction. Therefore, monotonic and cyclic tests on the CLT wall-to-floor connections were performed in shear and tensile/compressive load direction. Specimens with and without insulation under the angle bracket and between the CLT panels were studied and compared. Tests of insulated specimens have proved that the insulation has a marginal influence on the load-bearing capacity; however, it significantly influences the stiffness characteristics. In general, the experiments have shown that the connection could also be used for seismic resistant CLT structures, although some minor improvements should be made.
Online Access
Free
Resource Link
Less detail

Mass Timber Design Manual

https://research.thinkwood.com/en/permalink/catalogue2780
Year of Publication
2021
Topic
Acoustics and Vibration
Connections
Cost
Design and Systems
Energy Performance
Environmental Impact
Fire
General Information
Moisture
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Organization
WoodWorks
Think Wood
Year of Publication
2021
Country of Publication
United States
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Connections
Cost
Design and Systems
Energy Performance
Environmental Impact
Fire
General Information
Moisture
Keywords
Mass Timber
United States
Building Systems
Tall Wood
Sustainability
IBC
Applications
Language
English
Research Status
Complete
Summary
This manual is helpful for experts and novices alike. Whether you’re new to mass timber or an early adopter you’ll benefit from its comprehensive summary of the most up to date resources on topics from mass timber products and applications to tall wood construction and sustainability. The manual’s content includes WoodWorks technical papers, Think Wood continuing education articles, case studies, expert Q&As, technical guides and other helpful tools. Click through to view each individual resource or download the master resource folder for all files in one handy location. For your convenience, this book will be updated annually as mass timber product development and the market are quickly evolving.
Online Access
Free
Resource Link
Less detail

Mass Timber Building Science Primer

https://research.thinkwood.com/en/permalink/catalogue2797
Year of Publication
2021
Topic
Design and Systems
Moisture
Fire
Acoustics and Vibration
General Information
Connections
Market and Adoption
Serviceability
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Author
Kesik, Ted
Martin, Rosemary
Organization
Mass Timber Institute
RDH Building Science
Publisher
Mass Timber Institute
Year of Publication
2021
Country of Publication
Canada
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Design and Systems
Moisture
Fire
Acoustics and Vibration
General Information
Connections
Market and Adoption
Serviceability
Keywords
Mass Timber
Building Science
Language
English
Research Status
Complete
Summary
The development of this primer commenced shortly after the 2018 launch of the Mass Timber Institute (MTI) centered at the University of Toronto. Funding for this publication was generously provided by the Ontario Ministry of Natural Resources and Forestry. Although numerous jurisdictions have established design guides for tall mass timber buildings, architects and engineers often do not have access to the specialized building science knowledge required to deliver well performing mass timber buildings. MTI worked collaboratively with industry, design professionals, academia, researchers and code experts to develop the scope and content of this mass timber building science primer. Although provincially funded, the broader Canadian context underlying this publication was viewed as the most appropriate means of advancing Ontario’s nascent mass timber building industry. This publication also extends beyond Canada and is based on universally applicable principles of building science and how these principles may be used anywhere in all aspects of mass timber building technology. Specifically, these guidelines were developed to guide stakeholders in selecting and implementing appropriate building science practices and protocols to ensure the acceptable life cycle performance of mass timber buildings. It is essential that each representative stakeholder, developer/owner, architect/engineer, supplier, constructor, wood erector, building official, insurer, and facility manager, understand these principles and how to apply them during the design, procurement, construction and in-service phases before embarking on a mass timber building project. When mass timber building technology has enjoyed the same degree of penetration as steel and concrete, this primer will be long outdated and its constituent concepts will have been baked into the training and education of design professionals and all those who fabricate, construct, maintain and manage mass timber buildings. One of the most important reasons this publication was developed was to identify gaps in building science knowledge related to mass timber buildings and hopefully to address these gaps with appropriate research, development and demonstration programs. The mass timber building industry in Canada is still a collection of seedlings that continue to grow and as such they deserve the stewardship of the best available building science knowledge to sustain them until such time as they become a forest that can fend for itself.
Online Access
Free
Resource Link
Less detail

From Canada to the World: FPInnovations' Three-Generation Floor Vibration Research and Code Implementation

https://research.thinkwood.com/en/permalink/catalogue2826
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Floors
Author
Hu, Lin
Cuerrier-Auclair, Samuel
Qian, Cheng
Dale, Angela
Organization
FPInnovations
Year of Publication
2021
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Lumber Joists
Engineered Wood Joists
Mass Timber
Floor Vibration-controlled Design Method
CSA 086
National Building Code of Canada
Language
English
Research Status
Complete
Series
InfoNote
Summary
FPInnovations’involvement in various codes and standards technical committees aims to monitor, contributeor propose changes for improvement as well as to create new standards to include new wood products and systems based on knowledge developed from FPInnovations’ research activities. Involvement also allows FPInnovations to be aware of any potential changes to codes and standards and to recognize and address threats and opportunities for wood use. Codes and standards exist to protect consumers but are written to reflect the current practices and knowledge based on a consensus agreement by committee members. FPInnovations’ involvement in codes and standards committees helps to align the coming changes with new wood products. This InfoNote reports on FPInnovations’ contribution to the floor vibration-control design methods on codes and standards implementation and research.
Online Access
Free
Resource Link
Less detail

A Study on the Sound Insulation Performance of Cross-laminated Timber

https://research.thinkwood.com/en/permalink/catalogue2837
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Walls
Author
Lin, Jui-Yen
Yang, Chieh-Ting
Tsay, Yaw-Shyan
Organization
National Cheng Kung University
Editor
Savaidis, Georgios
Publisher
MDPI
Year of Publication
2021
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Walls
Topic
Acoustics and Vibration
Keywords
Transmission Loss
Acoustic Performance
Predictive Model
Numerical Simulation
Language
English
Research Status
Complete
Series
Materials
Summary
Cross-laminated Timber (CLT) has become an emerging board material of wood construction that is strong enough to sustain a high-rise building. However, many wooden congregate housing units overseas that utilize CLT have poor sound environments because the low mass of such wood influences sound insulation performance. In this research, we explored the effect of different CLT walls on sound insulation performance and integrated applicable sound insulation simulation tools to simplify the process of designing a CLT wall structure. This research aimed at a double wall and CLT combined with a gypsum board as the research object. The sound insulation performance test was carried out in a laboratory, while the sound insulation performance of the structure was predicted through simulation tools and prediction models and then compared with the measured values to verify the applicability of the simulation tool. The CLT with a double wall and CLT with gypsum board (CLT + GB) achieved Rw of 50 dB. The numerical simulation had better prediction performance than INSUL at the double wall, while the double wall with cavity structure was close to the measured result via mass law calculation. The INSUL-predicted CLT with a gypsum board at 500 Hz~3150 Hz was close to the measured value.
Online Access
Free
Resource Link
Less detail

Parameter identification for a point-supported cross laminated timber slab based on experimental and numerical modal analysis

https://research.thinkwood.com/en/permalink/catalogue2855
Year of Publication
2021
Topic
Serviceability
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Kawrza, Michael
Furtmüller, Thomas
Adam, Christoph
Maderebner, Roland
Organization
University of Innsbruck
Publisher
Springer
Year of Publication
2021
Country of Publication
Austria
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Serviceability
Acoustics and Vibration
Keywords
Modal Analysis
Complex Mode Shape
Point-Supported
Language
English
Research Status
Complete
Series
European Journal of Wood and Wood Products
Summary
In this paper, the dynamic properties of a point-supported cross-laminated timber slab are studied in order to determine the elastic material parameters on this basis. A detailed experimental modal analysis of the slab with dimensions 16.0 m x 11.0 m is performed, and seven modes including the natural frequencies, damping ratios and mode shape components at 651 sensor positions are identified. The found mode shapes are complex due to environmental influences that occurred during the two-day measurement campaign. This error is corrected by eliminating these influences. A finite element model of the slab is presented, whose parameters in terms of material properties and boundary conditions are determined by a model updating procedure. Based on the modal properties of the seven experimentally identified modes, an accurate and robust parameter set is obtained, which can be used in further numerical studies of the considered CLT to check serviceability limit criteria.
Online Access
Free
Resource Link
Less detail

Model updating of seven-storey cross-laminated timber building designed on frequency-response-functions-based modal testing

https://research.thinkwood.com/en/permalink/catalogue2866
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Kurent, Blaž
Brank, Boštjan
Ao, Wai Kei
Organization
University of Ljubljana
University of Exeter
Publisher
Taylor&Francis Group
Year of Publication
2021
Country of Publication
Slovenia
United Kingdom
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Keywords
Tall Timber Buildings
Dynamic Service Loading
Forced Vibration Tests
Modal Properties
Language
English
Research Status
Complete
Series
Structure and Infrastructure Engineering
Summary
Based on the experimental estimation of the key dynamic properties of a seven-storey building made entirely of cross-laminated timber (CLT) panels, the finite element (FE) model updating was performed. The dynamic properties were obtained from an input-output full-scale modal testing of the building in operation. The chosen parameters for the FE model updating allowed the consideration of the timber connections in a smeared sense. This approach led to an excellent match between the first six experimental and numerical modes of vibrations, despite spatial aliasing. Moreover, it allowed, together with the sensitivity analysis, to estimate the stiffness (affected by the connections) of the building structural elements. Thus, the study provides an insight into the as-built stiffness and modal properties of tall CLT building. This is valuable because of the currently limited knowledge about the dynamics of tall timber buildings under service loadings, especially because their design is predominantly governed by the wind-generated vibrations.
Online Access
Free
Resource Link
Less detail

U.S. Mass Timber Floor Vibration Design Guide

https://research.thinkwood.com/en/permalink/catalogue2874
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Organization
WoodWorks
Year of Publication
2021
Country of Publication
United States
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Floor Vibration
Vibration Design Methods
Finite Element Modeling
Language
English
Research Status
Complete
Summary
The scope of this guide focuses on the design of mass timber floor systems to limit human-induced vibration. The primary performance goal is to help designers achieve a low probability of adverse comment regarding floor vibrations in a manner consistent with the vibration design guides for steel and concrete systems. This includes excitation primarily from human walking as observed by other people in the building. Some treatment of design for sensitive equipment in response to human walking is also discussed. This design guide covers the range of currently available mass timber panels, including cross-laminated timber (CLT) manufactured from either solid sawn or structural composite lumber (SCL) laminations, nail-laminated timber (NLT), dowel laminated timber (DLT) and glue-laminated timber (GLT), as well as their support framework of timber beams. The target user of this guide is a design professional with working knowledge of mass timber structural design and some background knowledge of structural dynamics as related to floor vibrations. It may be particularly useful to design engineers with limited experience with vibration analysis, experienced multi-material engineers familiar with vibration analysis but unfamiliar with mass timber vibration, and applications engineers assisting manufacturers in the development of solutions and proposals for projects.
Online Access
Free
Resource Link
Less detail

The Influence of Floor Layering on Airborne Sound Insulation and Impact Noise Reduction: A Study on Cross Laminated Timber (CLT) Structures

https://research.thinkwood.com/en/permalink/catalogue2894
Year of Publication
2021
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Bettarello, Federica
Gasparella, Andrea
Caniato, Marco
Organization
University of Trieste
Free University of Bozen
Editor
Piana, Edoardo
Bonfiglio, Paolo
Rychtarikova, Monika
Publisher
MDPI
Year of Publication
2021
Country of Publication
Italy
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Impact Noise Transmission
Sound Insulation
Rubber Ball
Tapping Machine
Sustainable
Language
English
Research Status
Complete
Series
Applied Sciences
Summary
The use of timber constructions recently increased. In particular, Cross Laminated Timber floors are often used in multi-story buildings. The development of standardization processes, product testing, design of details and joints, the speed of construction, and the advantages of eco-sustainability are the main reasons why these structures play a paramount role on the international building scene. However, for further developments, it is essential to investigate sound insulation properties, in order to meet the requirements of indoor comfort and comply with current building regulations. This work presents the results obtained by in field measurements developed using different sound sources (tapping machine, impact rubber ball, and airborne dodecahedral speaker) on Cross Laminated Timber floors, changing different sound insulation layering (suspended ceiling and floating floors). Results clearly show that the influence on noise reduction caused by different layering stimulated by diverse noise source is not constant and furthermore that no available analytical model is able to correctly predict Cross Laminated Timber floors acoustic performances.
Online Access
Free
Resource Link
Less detail

125 records – page 1 of 13.