Skip header and navigation

Refine Results By

10 records – page 1 of 1.

Monitoring Moisture Performance of Cross-Laminated Timber Building Elements during Construction

https://research.thinkwood.com/en/permalink/catalogue2102
Year of Publication
2019
Topic
Site Construction Management
Moisture
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

Monitored Indoor Environmental Quality of a Mass Timber Office Building: A Case Study

https://research.thinkwood.com/en/permalink/catalogue2103
Year of Publication
2019
Topic
Serviceability
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

An Exploration into Tornado Resistant Residential CLT Structures

https://research.thinkwood.com/en/permalink/catalogue2111
Year of Publication
2019
Topic
Wind
Design and Systems
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

Structural Performance of a Novel Interlocking Glued Solid Timber System

https://research.thinkwood.com/en/permalink/catalogue2172
Year of Publication
2019
Topic
Design and Systems
Material
Timber (unspecified)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
General Application

Structural Robustness and Timber Buildings - A Review

https://research.thinkwood.com/en/permalink/catalogue2173
Year of Publication
2019
Topic
Design and Systems
Material
Glulam (Glue-Laminated Timber)
Light Frame (Lumber+Panels)
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
General Application

Development of a Smart Timber Bridge (Phase III): Moisture and Strain Sensor Investigation for Historic Covered Bridges

https://research.thinkwood.com/en/permalink/catalogue2182
Year of Publication
2019
Topic
Moisture
Material
Glulam (Glue-Laminated Timber)
Other Materials
Application
Bridges and Spans
Author
Phares, Brent
Pence, Trevor
Wacker, James
Hosteng, Travis
Year of Publication
2019
Country of Publication
United States
Format
Report
Material
Glulam (Glue-Laminated Timber)
Other Materials
Application
Bridges and Spans
Topic
Moisture
Keywords
Moisture Content
Sensor
Strain
Reliability
Accuracy
Language
English
Research Status
Complete
Series
General Technical Report
Abstract
Nationwide, bridges are deteriorating at a rate faster than they can be rehabilitated and maintained. This has resulted in a search for new methods to rehabilitate, repair, manage, and construct bridges. As a result, structural health monitoring and smart structure concepts have emerged to help improve bridge management. In the case of timber bridges, however, a limited amount of research as been conducted on long-term structural health monitoring solutions, and this is especially true in regards to historic covered timber bridges. To date, evaluation efforts of timber bridges have focused primarily on visual inspection data to determine the structural integrity of timber structures. To fill this research need and help improve timber bridge inspection and management strategies, a 5-year research plan to develop a smart timber bridge structure was undertaken. The overall goal of the 5-year plan was to develop a turnkey system to analyze, monitor, and report on the performance and condition of timber bridges. This report outlines one phase of the 5-year research plan and focuses on developing and attaching moisture sensors onto timber bridge components. The goal was to investigate the potential for sensor technologies to reliably monitor the in situ moisture content of the timber members in historic covered bridges, especially those recently rehabilitated with glulam materials. The timber-specific moisture sensors detailed in this report and the data collected from them will assist in advancing the smart timber bridge.
Online Access
Free
Resource Link
Less detail

Instrumentation for Monitoring Performance in a Six-Storey Building in Vancouver Built for High Energy Performance

https://research.thinkwood.com/en/permalink/catalogue1177
Year of Publication
2018
Topic
Serviceability
Material
Light Frame (Lumber+Panels)
Application
Passive House
Author
Wang, Jieying
Thomas, Tony
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
Light Frame (Lumber+Panels)
Application
Passive House
Topic
Serviceability
Keywords
Residential
Commercial
Long-term Performance
Moisture
Building Envelope
Indoor Environmental Quality
Vertical Differential Movement
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
This report documents the instrumentation installed for monitoring moisture, indoor air quality and differential movement performance in a six-storey building located in the City of Vancouver. The building has five storeys of wood-frame construction above a concrete podium, providing 85 rental units for residential and commercial use...
Online Access
Payment Required
Resource Link
Less detail

Field Measurement of Vertical Movement and Roof Moisture Performance of the Wood Innovation and Design Centre

https://research.thinkwood.com/en/permalink/catalogue1182
Year of Publication
2018
Topic
Serviceability
Moisture
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
PSL (Parallel Strand Lumber)
Application
Wood Building Systems
Roofs
Author
Wang, Jieying
Organization
FPInnovations
Year of Publication
2018
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
PSL (Parallel Strand Lumber)
Application
Wood Building Systems
Roofs
Topic
Serviceability
Moisture
Keywords
Vertical Movement
Moisture Content
Temperature
Relative Humidity
Monitoring
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Two of the major topics of interest to those designing taller and larger wood buildings are the susceptibility to differential movement and the likelihood of mass timber components drying too slowly after they become wet during construction. The Wood Innovation and Design Centre in Prince George, British Columbia provides a unique opportunity for non-destructive...
Online Access
Free
Resource Link
Less detail

Experimental Analysis of Pretensioned CLT-Glulam T-Section Beams

https://research.thinkwood.com/en/permalink/catalogue1216
Year of Publication
2018
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Beams
Author
Estévez-Cimadevila, Javier
Suárez-Riestra, Félix
Otero-Chans, Dolores
Martín-Gutiérrez, Emilio
Publisher
Hindawi Publishing Corporation
Year of Publication
2018
Country of Publication
United Kingdom
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Beams
Topic
Mechanical Properties
Keywords
Nontensioned
Bending Strength
Stiffness
Pre-Tension
Language
English
Research Status
Complete
Series
Advances in Materials Science and Engineering
ISSN
1687-8442
Online Access
Free
Resource Link
Less detail

Seismic Assessment of a Three-Story Wood Building with an Integrated CLT-Lightframe System using RTHS

https://research.thinkwood.com/en/permalink/catalogue1293
Year of Publication
2018
Topic
Mechanical Properties
Seismic
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Shear Walls

10 records – page 1 of 1.