Skip header and navigation

10 records – page 1 of 1.

Efficient Measurement of Elastic Constants of Cross Laminated Timber using Modal Testing

https://research.thinkwood.com/en/permalink/catalogue117
Year of Publication
2014
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Zhou, Jianhui
Chui, Ying Hei
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Acoustics and Vibration
Keywords
Elasticity
Modal Testing
Modulus of Elasticity
Natural Frequency
Testing
Vibrations
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
It has been shown that measurement of elastic constants of orthotropic wood-based panel products can be more efficiently measured by modal testing technique. Identification of vibration modes and corresponding natural frequencies is key to the application of modal testing technique. This process is generally tedious and requires a number of measurement locations for mode shape identification. In this study, a simplified method for frequency identification was developed which will facilitate the adoption of the vibration-based testing technique for laboratory and industrial application. In the method, the relationship between frequency order and mode order is first studied considering the boundary condition, elastic properties of the orthotropic panel. An algorithm is proposed to predict the frequency values and mode indices based on corresponding normalized sensitivity to elastic constants, initial estimates of orthotropic ratios and measured fundamental natural frequency. The output from the algorithm can be used for identification of sensitive natural frequencies from up to three frequency spectra. Then the algorithm is integrated with the elastic calculation algorithm to extract the elastic constants from the sensitive frequencies. The elastic constants of cross laminated timber panels were measured by the proposed method. The moduli of elasticity agree well with static testing results. The calculated in-plane shear modulus was found to be within the expected range.
Online Access
Free
Resource Link
Less detail

Nonlinear Pre-Yield Modal Properties of Timber Structures with Large-Diameter Steel Dowel Connections

https://research.thinkwood.com/en/permalink/catalogue132
Year of Publication
2014
Topic
Connections
Acoustics and Vibration
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Frames

Assessment of Timber Floor Vibration Performance: A Case Study in Italy

https://research.thinkwood.com/en/permalink/catalogue147
Year of Publication
2014
Topic
Acoustics and Vibration
Design and Systems
Material
CLT (Cross-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Author
Casagrande, Daniele
Piazza, Maurizio
Franciosi, Alessandro
Pederzolli, Federico
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Topic
Acoustics and Vibration
Design and Systems
Keywords
Dynamic
Eurocode
ISO
Italy
Natural Frequency
Numerical analysis
Testing
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
Vibrations induced by people walking is one of the most important issue in timber floor design. Low natural frequency and low mass require a careful analysis in order to prevent significant annoyance and to guarantee an acceptable human comfort. This paper is concerned with the assessment of vibration performance of a timber-concrete composite timber floor and a cross laminated timber floor used in two timber buildings under construction in Trento (Italy). Different approaches suggested by Standards and literature were employed: analytical methods, numerical analyses and laboratory tests. About analytical methods the uniformed distributed load deflection criterion (ULD), the Eurocode 5 criterion and some criterions from literature were compared, whereas the Vibration Dose Value (VDV) method, as suggested by ISO 10137, was used for the numerical models and the laboratory tests. The numerical analyses were carried out by means of a finite element modelling. The load due to footfall was simulated by static and dynamic vertical forces. The laboratory tests were characterized by thirty walking tests for each floor. Impact testing with modal hammer was also undertaken in order to investigate the dynamic properties of the specimens. All results are compared and discussed.
Online Access
Free
Resource Link
Less detail

Evaluation of North American Vibration Standards for Mass-Timber Floors

https://research.thinkwood.com/en/permalink/catalogue192
Year of Publication
2014
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Author
Schultz, Joshua
Johnson, Benton
Editor
M. Allen, R. Mayes, D. Rixen
Publisher
Springer
Year of Publication
2014
Country of Publication
Switzerland
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Topic
Acoustics and Vibration
Keywords
North America
Language
English
Research Status
Complete
Series
Dynamics of Coupled Structures, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series
Online Access
Payment Required
Resource Link
Less detail

Effect of End Support Conditions on the Vibrational Performance of Cross-Laminated Timber Floors

https://research.thinkwood.com/en/permalink/catalogue209
Year of Publication
2014
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Maldonado, Saul
Chui, Ying Hei
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
End Support
Natural Frequency
Damping
Static Deflection
Finite Element Model
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
This study focused on the vibrational behaviour of a 3-ply cross-laminated timber (CLT) plate supported on two sides with different support conditions. Three end support setups were studied; 1) top load over the two supported edges, 2) direct fastening t...
Online Access
Free
Resource Link
Less detail

Direct Impact Sound Insulation of Cross Laminate Timber Floors with and Without Toppings

https://research.thinkwood.com/en/permalink/catalogue227
Year of Publication
2014
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Zeitler, Berndt
Schoenwald, Stefan
Sabourin, Ivan
Organization
Inter-noise
Year of Publication
2014
Country of Publication
Australia
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
North America
Sound Insulation
Concrete Topping
Interlayer
Language
English
Conference
Inter-Noise 2014
Research Status
Complete
Notes
November 16-19, 2014, Melbourne, Australia
Online Access
Free
Resource Link
Less detail

Ambient Vibration Testing and Modal Analysis of Multi-Storey Cross Laminated Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue237
Year of Publication
2014
Topic
Acoustics and Vibration
Wind
Serviceability
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Reynolds, Thomas
Bolmsvik, Åsa
Vessby, Johan
Chang, Wen-Shao
Harris, Richard
Bawcombe, Jonathan
Bregulla, Julie
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Wind
Serviceability
Keywords
Modal Properties
Multi-Storey
Damping
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
The ambient movement of three modern multi-storey timber buildings has been measured and used to determine modal properties. This information, obtained by a simple, unobtrusive series of tests, can give insights into the structural performance of these f...
Online Access
Free
Resource Link
Less detail

Wind-Induced Motion Of 'Treet' - A 14-Storey Timber Residential Building in Norway

https://research.thinkwood.com/en/permalink/catalogue459
Year of Publication
2014
Topic
Acoustics and Vibration
Wind
Material
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
Author
Bjertnæs, Magne
Arne Malo, Kjell
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Wind
Keywords
Multi-Storey
Comfort Properties
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
This paper deals with the comfort properties in a planned 14-storey timber apartment building in Bergen, Norway. The building will be one of the tallest timber buildings in the world. The building consists of load-carrying glulam trusses with two interme...
Online Access
Free
Resource Link
Less detail

Development of Southern Pine Cross-Laminated Timber for Building Code Acceptance

https://research.thinkwood.com/en/permalink/catalogue474
Year of Publication
2014
Topic
Acoustics and Vibration
Fire
Mechanical Properties
Market and Adoption
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Hindman, Daniel
Bouldin, John
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Acoustics and Vibration
Fire
Mechanical Properties
Market and Adoption
Keywords
Southern Pine
Fire Performance
Acoustical Performance
International Building Code
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
The current interest and growth of cross laminated timber (CLT) products has spurred interest in the manufacture of CLTs in the United States. The purpose of this paper is to explore the development of CLT materials from southern pine lumber commonly ava...
Online Access
Free
Resource Link
Less detail

Model Calibration of Wooden Structure Assemblies - Using EMA and FEA

https://research.thinkwood.com/en/permalink/catalogue638
Year of Publication
2014
Topic
Acoustics and Vibration
Material
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Author
Bolmsvik, Åsa
Linderholt, Andreas
Olsson, Jörgen
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Keywords
Experimental Modal Analysis
Finite Element Model
Sound Transmission
Vibrational Tests
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
To predict and, when needed to fulfil regularizations or other requirements, lower the impact sound transmission in light weight buildings prior to building, dynamically representative calculation models are needed. The material properties of commonly us...
Online Access
Free
Resource Link
Less detail

10 records – page 1 of 1.