Skip header and navigation

10 records – page 1 of 1.

Chapter 7: Vibration Performance of Cross-Laminated Timber Floors

https://research.thinkwood.com/en/permalink/catalogue813
Year of Publication
2011
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Hu, Lin
Gagnon, Sylvain
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Deflection
Natural Frequency
Vibration Controlled Spans
Uniformly Distributed Load
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Cross-laminated timber (CLT) is proving to be a promising solution for wood to compete in building sectors where steel and concrete have traditionally predominated. Studies at FPInnovations found that bare CLT floor systems differ from traditional lightw...
Online Access
Free
Resource Link
Less detail

Chapter 9: Acoustic Performance of Cross-Laminated Timber Assemblies

https://research.thinkwood.com/en/permalink/catalogue815
Year of Publication
2011
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Author
Gagnon, Sylvain
Kouyoumji, Jean-Luc
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Topic
Acoustics and Vibration
Keywords
North America
Residential
Sound Transmission Class
Impact Sound Insulation Class
Acoustic Performance
Multi-Residential
Non-Residential
US
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Adequate levels of noise/sound control in multi-family buildings are mandatory requirements of building codes in Canada, the United States, Europe, and most developed Asian countries. In many jurisdictions, these requirements are as strictly enforced as ...
Online Access
Free
Resource Link
Less detail

Chapter 10: Building Enclosure Design of Cross-Laminated Timber Construction

https://research.thinkwood.com/en/permalink/catalogue816
Year of Publication
2011
Topic
Serviceability
Moisture
Material
CLT (Cross-Laminated Timber)
Application
Walls
Author
Finch, Graham
Ricketts, Dave
Wang, Jieying
Thivierge, Constance
Morris, Paul
Organization
FPInnovations
Year of Publication
2011
Country of Publication
Canada
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Walls
Topic
Serviceability
Moisture
Keywords
Airflow
Climate
Heat
Insulation
Moisture
North America
Language
English
Research Status
Complete
Series
CLT Handbook - Canadian Edition
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
Cross-laminated timber (CLT) has become popular in Europe for the prefabricated construction of wall, roof and flooring elements. The use of CLT in North America is gaining interest in both the construction and wood industries. Several North American man...
Online Access
Free
Resource Link
Less detail

Chapter 7: Vibration Performance of Cross-Laminated Timber Floors

https://research.thinkwood.com/en/permalink/catalogue826
Year of Publication
2013
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Hu, Lin
Chui, Ying Hei
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Deflection
Vibration Controlled Spans
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
Cross-laminated timber (CLT) is proving to be a promising solution for wood to compete in building sectors where steel and concrete have traditionally predominated. Studies at FPInnovations found that bare CLT floor systems differ from traditional lightweight wood joisted floors with typical mass around 4 lb./ft2 (20 kg/m2) and fundamental natural frequency above 15 Hz, and heavy concrete slab floors with a mass above 40 lb./ft2 (200 kg/m2) and fundamental natural frequency below 8 Hz. Based on FPInnovations' test results, bare CLT floors were found to have mass varying from approximately 6 lb./ft2 (30 kg/m2) to 30 lb./ft2 (150 kg/m2), and a fundamental natural frequency above 9 Hz. Due to these special properties, the existing standard vibration controlled design methods for lightweight and heavy floors may not be applicable for CLT floors. ...
Online Access
Free
Resource Link
Less detail

Chapter 9: Sound Insulation of Cross-Laminated Timber Assemblies

https://research.thinkwood.com/en/permalink/catalogue828
Year of Publication
2013
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Ceiling
Author
Hu, Lin
Adams, David
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls
Ceiling
Topic
Acoustics and Vibration
Keywords
Sound Insulation
International Building Code
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
ISBN
978-0-86488-553-1
ISSN
1925-0495
Abstract
The intent of this Chapter is to answer simple questions related to the definition of sound, its sources, quantification and methods of measurement, acceptable levels of sound, differences between sound and noise, etc. Of course, when verbalizing such questions, the solutions for sound control will be naturally unfolded to readers. This Chapter is intended to thoroughly separate myth from reality. The Chapter also introduces the International Building Code (IBC) requirements for sound insulation in buildings. State of the art construction details for CLT walls and floor/ceiling assemblies generally meeting IBC requirements are provided herein and are based on results of tests performed in various laboratories in the world and in the field by FPInnovations. A step by step construction practices guide then leads the reader towards the final goal, which is the occupants' satisfaction. We expect that after reading this Chapter, the reader will be in a position to acknowledge that CLT buildings can achieve satisfactory sound insulation levels if proper design and installation are followed. Note that, considering the short history of CLT construction, the journey is only beginning.
Online Access
Free
Resource Link
Less detail

Chapter 10: Building Enclosure Design for Cross-Laminated Timber Construction

https://research.thinkwood.com/en/permalink/catalogue829
Year of Publication
2013
Topic
Design and Systems
Moisture
Material
CLT (Cross-Laminated Timber)
Application
Roofs
Walls
Author
Glass, Samuel
Wang, Jieying
Easley, Steve
Finch, Graham
Organization
FPInnovations
Binational Softwood Lumber Council
Year of Publication
2013
Country of Publication
Canada
United States
Format
Book Section
Material
CLT (Cross-Laminated Timber)
Application
Roofs
Walls
Topic
Design and Systems
Moisture
Keywords
Airflow
Climate
Heat
Moisture Control
Building Enclosure
Exterior Walls
Language
English
Research Status
Complete
Series
CLT Handbook - US Edition
Abstract
Cross-laminated timber (CLT) was developed in Europe for the prefabricated construction of wall, roof, and flooring elements. Adaption of CLT for use in the United States requires consideration of the different climates, building codes, and construction methods in this country. ... This Chapter provides guidance on hear, air, and moisture control in wall and roof assemblies that utilize CLT panels in U.S. climate zones. The overarching strategies are to prevent wetting of CLT panels by using drained wall systems, to control airflow using an air barrier on the exterior of the CLT panels, to place rigid insulation to the exterior of the panels, to prevent moisture from accumulating within the panels, and to allow the panels to dry should they get wet. In certain climates, preservative treatment of CLT is recommended to provide additional protection against potential hazards such as decay and termites. ...
Online Access
Free
Resource Link
Less detail

Serviceability of Next-Generation Wood Buildings: Sound Insulation Performance of Wood Buildings

https://research.thinkwood.com/en/permalink/catalogue402
Year of Publication
2014
Topic
Acoustics and Vibration
Serviceability
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Timber-Concrete Composite
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Floors
Walls
Author
Hu, Lin
Organization
FPInnovations
Year of Publication
2014
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Timber-Concrete Composite
Light Frame (Lumber+Panels)
Application
Wood Building Systems
Floors
Walls
Topic
Acoustics and Vibration
Serviceability
Keywords
Apparent Sound Insulation Class
Field Sound Insulation Class
Apparently Sound Transmission Class
Field Sound Transmission Class
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
This report documents apparent/field impact insulation class (AIIC/FIIC) ratings and apparent/field sound transmission class (ASTC/FSTC) ratings for a large number of light-frame wood-joisted floors, cross-laminated timber floors (CLT), massive glulam floors, and a wood-concrete composite floor...
Online Access
Payment Required
Resource Link
Less detail

In-Situ Testing at Wood Innovation and Design Centre: Floor Vibration, Building Vibration, and Sound Insulation Performance

https://research.thinkwood.com/en/permalink/catalogue284
Year of Publication
2015
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Author
Hu, Lin
Pirvu, Ciprian
Ramzi, Redouane
Organization
FPInnovations
Year of Publication
2015
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Walls
Floors
Topic
Acoustics and Vibration
Keywords
Natural Frequency
Damping Ratio
Static Deflection Testing
Vibration Performance
Sound Transmission
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
In order to address the lack of measured natural frequencies and damping ratios for wood and hybrid wood buildings, and lack of knowledge of vibration performance of innovative CLT floors and sound insulation performance of CLT walls and floors, FPInnovations conducted...
Online Access
Free
Resource Link
Less detail

Sound Insulation Performance of Elevator Shaft Walls built with Nail-Laminated Timber Panels - Exploratory Tests and Preliminary Results

https://research.thinkwood.com/en/permalink/catalogue364
Year of Publication
2016
Topic
Acoustics and Vibration
Material
NLT (Nail-Laminated Timber)
Application
Shafts and Chases
Author
Pirvu, Ciprian
Organization
FPInnovations
Year of Publication
2016
Country of Publication
Canada
Format
Report
Material
NLT (Nail-Laminated Timber)
Application
Shafts and Chases
Topic
Acoustics and Vibration
Keywords
Building Codes
Canada
Sound Insulation
Apparent Sound Insulation Class
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
As 6-storey wood-frame, massive-timber and hybrid wood buildings are increasingly accepted by more jurisdictions across Canada, there is a need to develop reliable elevator shaft designs that meet the minimum structural, fire, and sound requirements in building...
Online Access
Payment Required
Resource Link
Less detail

Taller and Larger Wood Buildings: Potential Impacts of Wetting on Performance of Mass Timber Buildings

https://research.thinkwood.com/en/permalink/catalogue372
Year of Publication
2016
Topic
Serviceability
Moisture
Application
Wood Building Systems
Author
Wang, Jieying
Organization
FPInnovations
Year of Publication
2016
Country of Publication
Canada
Format
Report
Application
Wood Building Systems
Topic
Serviceability
Moisture
Keywords
Wetting
Drying
Wood-Moisture Relationship
Language
English
Research Status
Complete
Notes
Report is currently not available due to the redevelopment of FPInnovations' publications website.
Abstract
This report summarizes basic wood-moisture relationships, and reviews conditions conducive to adverse consequences of wetting, such as staining, mold growth, decay, strength reduction, and dimensional change and distortion. It also outlines solutions and available resources related to on-site moisture management and design measures. Sorption, including desorption...
Online Access
Payment Required
Resource Link
Less detail

10 records – page 1 of 1.