Skip header and navigation

51 records – page 1 of 6.

Mass Timber Design Manual

https://research.thinkwood.com/en/permalink/catalogue2780
Year of Publication
2021
Topic
Acoustics and Vibration
Connections
Cost
Design and Systems
Energy Performance
Environmental Impact
Fire
General Information
Moisture
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Organization
WoodWorks
Think Wood
Year of Publication
2021
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Connections
Cost
Design and Systems
Energy Performance
Environmental Impact
Fire
General Information
Moisture
Keywords
Mass Timber
United States
Building Systems
Tall Wood
Sustainability
IBC
Applications
Research Status
Complete
Summary
This manual is helpful for experts and novices alike. Whether you’re new to mass timber or an early adopter you’ll benefit from its comprehensive summary of the most up to date resources on topics from mass timber products and applications to tall wood construction and sustainability. The manual’s content includes WoodWorks technical papers, Think Wood continuing education articles, case studies, expert Q&As, technical guides and other helpful tools. Click through to view each individual resource or download the master resource folder for all files in one handy location. For your convenience, this book will be updated annually as mass timber product development and the market are quickly evolving.
Online Access
Free
Resource Link
Less detail

Comparative Life-cycle Assessment of a Mass Timber Building and Concrete Alternative

https://research.thinkwood.com/en/permalink/catalogue2429
Year of Publication
2020
Topic
Environmental Impact
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems

Tall Wood Buildings: Design, Construction and Performance

https://research.thinkwood.com/en/permalink/catalogue2483
Edition
Second Edition
Year of Publication
2020
Topic
General Information
Design and Systems
Market and Adoption
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
Author
Green, Michael
Taggart, Jim
Edition
Second Edition
Publisher
Birkhauser
Year of Publication
2020
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems
Topic
General Information
Design and Systems
Market and Adoption
Keywords
Tall Wood
Case Study
Building Systems
Built Projects
Research Status
Complete
Summary
Tall wood buildings have been at the foreground of innovative building practice in urban contexts for a number of years. From London to Stockholm, from Vancouver to Melbourne timber buildings of up to 20 storeys have been built, are under construction or being considered. This dynamic trend was enabled by developments in the material itself, prefabrication and more flexibility in fire regulations. The low CO2 footprint of wood - often regionally sourced - is another strong argument in its favour. This publication explains the typical construction types such as panel systems, frame and hybrid systems. An international selection of 13 case studies is documented in detail with many specially prepared construction drawings, demonstrating the range of the technology.
Online Access
Payment Required
Resource Link
Less detail

Behaviour of Multi-Storey Cross-Laminated Timber Buildings Under Lateral Loading

https://research.thinkwood.com/en/permalink/catalogue2715
Year of Publication
2020
Topic
Connections
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
Walls
Author
Hughes, Claire
Publisher
Queen's University Belfast
Year of Publication
2020
Format
Thesis
Material
CLT (Cross-Laminated Timber)
Application
Walls
Topic
Connections
Design and Systems
Keywords
Lateral Loading
Tall Wood
Tall Timber Buildings
Connections
Monotonic Loading Tests
Constant Vertical Load
Wall Systems
Experimental Tests
Analytical Approach
Multi-Storey
Research Status
Complete
Summary
In response to the global drive towards sustainable construction, CLT has emerged as a competitive alternative to other construction materials. CLT buildings taller than 10-storeys and CLT buildings in regions of moderate to high seismicity would be subject to higher lateral loads due to wind and earthquakes than CLT buildings which have already been completed. The lack of structural design codes and limited literature regarding the performance of CLT buildings under lateral loading are barriers to the adoption of CLT for buildings which could experience high lateral loading. Previous research into the behaviour of CLT buildings under lateral loading has involved testing of building components. These studies have generally been limited to testing wall systems and connections which replicate configurations at ground floor storeys in buildings no taller than three storeys. Consequently, to develop the understanding of the performance of multi-storey CLT buildings under lateral loading, the performance of wall systems and connections which replicate conditions of those in above ground floor storeys in buildings taller than three storeys were experimentally investigated. The testing of typical CLT connections involved testing eighteen configurations under cyclic loading in shear and tension. The results of this experimental investigation highlighted the need for capacity-based design of CLT connections to prevent brittle failure. It was found that both hold down and angle bracket connections have strength and stiffness in shear and tension and by considering the strength of the connections in both directions, more economical design of CLT buildings could be achieved. The testing of CLT wall systems involved testing three CLT wall systems with identical configurations under monotonic lateral load and constant vertical load, with vertical loads replicating gravity loads at storeys within a 10-storey CLT building. The results show that vertical load has a significant influence on wall system behaviour; varying the vertical load was found to vary the contribution of deformation mechanisms to global behaviour within the elastic region, reinforcing the need to consider connection design at each individual storey. As there are still no structural design codes for CLT buildings, the accuracy of analytical methods presented within the literature for predicting the behaviour of CLT connections and wall systems under lateral loading was assessed. It was found that the analytical methods for both connections and wall systems are highly inaccurate and do not reflect experimentally observed behaviour.
Online Access
Free
Resource Link
Less detail

Connections for Stackable Heavy Timber Modules in Midrise to Tall Wood Buildings

https://research.thinkwood.com/en/permalink/catalogue2087
Year of Publication
2019
Topic
Connections
Design and Systems
Seismic
Material
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Zhang, Chao
Lee, George
Lam, Frank
Organization
University of British Columbia
Year of Publication
2019
Format
Report
Material
LVL (Laminated Veneer Lumber)
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Connections
Design and Systems
Seismic
Keywords
Modular
Intra-module Connection
Inter-module Vertical Connection
Inter-module horizontal Connection
Mid-Rise
Tall Wood
Screws
Load Transfer
Steel Angle Bracket
Stiffness
Strength
Ductility
Research Status
Complete
Summary
In Phase I (2018-19) of this project on Prefabricated Heavy Timber Modular Construction, three major types of connections used in a stackable modular building were studied: intramodule connection, inter-module vertical connection, and inter-module horizontal connection. The load requirement and major design criteria were identified...
Online Access
Free
Resource Link
Less detail

Wind and Earthquake Design Framework for Tall Wood-Concrete Hybrid System

https://research.thinkwood.com/en/permalink/catalogue2143
Year of Publication
2019
Topic
Seismic
Wind
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Tesfamariam, Solomon
Bezabeh, Matiyas
Skandalos, Konstantinos
Martinez, Edel
Dires, Selamawit
Bitsuamlak, Girma
Goda, Katsuichiro
Year of Publication
2019
Format
Report
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Seismic
Wind
Keywords
Tall Wood
Seismic design factors
Wind tunnel test
Ductility Factors
Timber-reinforced concrete
Force Modification Factors
Probabilistic Model
Wind Load
Overstrength seismic force
Research Status
Complete
Notes
DOI 10.14288/1.0380777
Summary
Advancement in engineered wood products altered the existing building height limitations and enhanced wooden structural members that are available on the market. These coupled with the need for a sustainable and green solution to address the ever-growing urbanization demand, avails wood as possible candidate for primary structural material in the construction industry. To this end, several researches carried out in the past decade to come up with sound structural solutions using a timber based structural system. Green and Karsh (2012) introduced the FFTT system; Tesfamariam et al. (2015) developed force-based design guideline for steel infilled with CLT shear walls, and SOM (2013) introduced the concrete jointed mass timber hybrid structural concepts. In this research, the basic structural concepts proposed by SOM (2013) is adopted. The objective of this research is to develop a wind and earthquake design guideline for concrete jointed tall mass timber buildings in scope from 10- to 40-storey office or residential buildings. The specific objective of this research is as follow: Wind serviceability design guideline for hybrid mass-timber structures. Calibration of design wind load factors for the serviceability wind design of hybrid tall mass timber structures. Guidelines to perform probabilistic modeling, reliability assessment, and wind load factor calibration. Overstrength related modification factor Ro and ductility related modification factor Rd for future implementation in the NBCC. Force-based design guideline following the capacity based design principles.
Online Access
Free
Resource Link
Less detail

Canadian Mass Timber Demonstration Projects Initiatives

https://research.thinkwood.com/en/permalink/catalogue2147
Year of Publication
2019
Topic
Market and Adoption
Application
Wood Building Systems

Cross-Laminated Timber Shear Walls in Balloon Construction: Seismic Performance of Steel Connections

https://research.thinkwood.com/en/permalink/catalogue2413
Year of Publication
2019
Topic
Seismic
Connections
Material
CLT (Cross-Laminated Timber)
Application
Walls

An Assessment of Greenhouse Gas Emissions from CLT and Glulam in Two Residential Nearly Zero Energy Buildings

https://research.thinkwood.com/en/permalink/catalogue2441
Year of Publication
2019
Topic
Environmental Impact
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Wood Building Systems

Timber Multi-Level Buildings to 20 Levels Based on a Central Core of Integrated CLT Panels

https://research.thinkwood.com/en/permalink/catalogue1804
Year of Publication
2018
Topic
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
Hybrid Building Systems
Wood Building Systems
Author
Chapman, John
Publisher
New Zealand Timber Design Society
Year of Publication
2018
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Hybrid Building Systems
Wood Building Systems
Topic
Design and Systems
Keywords
Panels
Multi-Storey
Integrated Elements
Structural Design
Tall Wood
Research Status
Complete
Summary
This research investigates a new structural system based on a central core of CLT (cross-laminated timber) panels to provide more useful multi-level timber buildings that are taller and with open floor areas. Because pinus radiata is a suitable timber for the manufacture of CLT panels, the system has the potential to add value to planted NZ forests and to earn overseas currency. Timber elements are proposed for the entire building structure – central core, columns, floor beams and floor joists. The vertical timber core is a very large square (or rectangular) hollow section that extends the full height of the building and is the main element for resisting lateral forces. Various aspects of the system are discussed in the paper. An analysis of the structure is reported and the paper concludes that the proposed structural system with CLT elements is suitable for buildings to at least twenty levels.
Online Access
Free
Resource Link
Less detail

51 records – page 1 of 6.