Structures and Architecture: Concepts, Applications and Challenges
Modern seismic design procedures are widely represented by the concept of Performance-Based Seismic Design (PBSD). Direct Displacement-Based Design (DDBD) procedure for PBSD of buildings is considered a very promising method which uses displacement as an input design parameter. The DDBD procedure first codified by Priestley requires an a priori estimate of the design displacement and the associated equivalent viscous damping of the structure, at design performance levels. In this paper, design parameters for the ultimate limit state have been developed for a common construction system for timber buildings. Such parameters are defined as a function of mechanical and geometrical connection configurations.
This study proposes an iterative direct displacement based design method for a novel steel-timber hybrid structure. The hybrid structure incorporates Cross Laminated Timber (CLT) shear panels as an infill in steel moment resisting frames. The proposed design method is applied to design 3-, 6-, and 9-story hybrid buildings with three bays and CLT infilled middle bay. Nonlinear time history analysis, using twenty earthquake ground motion records, is carried out to validate the performance of the design method. The results indicate that the proposed method effectively controls the displacements due to seismic excitation of the hybrid structure.
Cross-Laminated Timber (CLT) structures exhibit satisfactory performance under seismic conditions. This ispossible because of the high strength-to-weight ratio and in-plane stiffness of the CLT panels, and the capacity ofconnections to resist the loads with ductile deformations and limited impairment of strength. This study sum-marises a part of the activities conducted by the Working Group 2 of COST Action FP1402, by presenting an in-depth review of the research works that have analysed the seismic behaviour of CLT structural systems. Thefirstpart of the paper discusses the outcomes of the testing programmes carried out in the lastfifteen years anddescribes the modelling strategies recommended in the literature. The second part of the paper introduces theq-behaviour factor of CLT structures and provides capacity-based principles for their seismic design.
Recently, an innovative hybrid structure has been developed as an alternative lateral-load resisting system at The University of British Columbia. The hybrid structure incorporates Cross Laminated Timber (CLT) shear panels as an infill in steel moment resisting frames (SMRFs). In order to increase the applicability of the proposed system, in this thesis, a direct displacement based design methodology has been developed and analytically validated.
Initially, a nonlinear time history analysis (NLTHA) was carried out to study the lateral behaviour of the proposed hybrid structure. For this purpose, a total of 162 different hybrid buildings were modeled and analyzed in OpenSees by using twenty earthquake ground motions (2% probability exceedance in 50 years). Post-earthquake performance indicators (Maximum Interstory Drift (MISD) and Residual Interstory Drift (RISD)) were obtained from the analyses. To assist the post-seismic safety assessment of the hybrid buildings, surrogate models for MISD and RISD were developed using Response Surface Methodology and Artificial Neural Network (ANN). By using the ANN surrogate models as fitness functions for the Genetic Algorithm, optimal modeling parameters of the hybrid system were obtained.
Secondly, to represent the energy dissipative capacity of the hybrid system, an equivalent viscous damping (EVD) equation was developed. To formulate the EVD equation, 243 single-storey single-bay CLT infilled SMRF models were developed and subjected to monotonic static and semi-static cyclic analysis. The EVD of each model was calculated from the hysteretic responses based on Jacobsen’s area based approach and later calibrated using NLTHA.
Finally, an iterative direct displacement based design method was developed for the proposed hybrid structure. A detailed description of the proposed methodology is presented with a numerical example. In order to verify the proposed method, hybrid buildings with 3-, 6-, and 9- storey heights were designed. A calibrated EVD-ductility relationship was used to obtain the energy dissipation of the equivalent SDOF system for all case study buildings. Nonlinear time history analysis using twenty ground motion records was used to validate the performance of the proposed design methodology. The results indicate that the proposed design method effectively controls the displacements resulting from the seismic excitation of the hybrid structure.
With the rapidly increasing rate of urbanization worldwide especially in high seismic regions, researchers and engineers are seeking cost-effective building systems that are sustainable and can achieve superior seismic performances. Cross Laminated Timber (CLT) is an engineered wood based material which is known as a suitable wood product for tall building construction because of its robustness and enhanced fire performance. However, the traditional CLT platform shear wall lateral system is susceptible to damage at their connections during strong earthquakes, one of the potentially viable solutions to avoid connection damage in strong earthquakes is to implement inter-story isolation system in multi-story CLT buildings. Application of such a system leads to elongated building natural period, shifted lateral displacement demands, and increased amount of damping. This concept has been used in both steel and concrete structures but not yet in any wood buildings. Traditional light-framed wood building has a height limit of 4~5 stories which inter-story isolation is not beneficial or necessary. Only until recently, CLT material enables the construction of tall wood buildings that can fully utilize the benefit of inter-story isolation. The objective of this study is to apply performance-based seismic design methodology for inter-story isolated tall CLT buildings to explicitly target desirable wood building drift and isolation deformation levels. Thus, a generalized Direct Displacement Design (DDD) philosophy for inter-story isolated CLT buildings was outlined to provide different levels of performance against moderate to strong earthquakes. The proposed DDD approach was developed and implemented with two examples of different building heights. The examples include a 12-story CLT building representing mid-rise construction, and a 20-story building representing tall wood construction. The resulted design was validated using numerical simulation with an existing software package validated through large scale shake table tests. It is discovered that for the height range currently planned for wood construction, having just one isolation layer can provide reasonable level of damage mitigation. This study also provides insight into the widely used DDD approach on a fundamental level. A specific study on the uncertainty in current DDD procedures applying to linear and nonlinear structural systems was conducted. The research work result was disseminated as peer-reviewed publications that have been published or in the process of preparation.
In order to cope with the speed of urbanization around the world especially in areas of high seismicity, researchers and engineers have always been investigating cost-effective building systems with high seismic performance. Cross Laminated Timber (CLT) is a wood based material that is suitable for tall building construction. However, the current CLT system is prone to connection damage in strong earthquakes due to the vast majority of the system ductility resides in connections. One solution is the concept of inter-story isolation to develop a potentially resilient system that can remain damage free during strong earthquakes. A generalized displacement-based design method was developed to design an inter-story isolation system for a tall wood building based on articulated damage expectations. A12-story CLT building with one isolation layer was used to illustrate the proposed design method. The building performance was validated through numerical simulation under different seismic hazard levels.
New Zealand Society for Earthquake Engineering Conference
April 27-29, 2017, Wellington, New Zealand
With global urbanization trends, the demands for tall residential and mixeduse buildings in the range of 8~20 stories are increasing. One new structural system in this height range are tall wood buildings which have been built in select locations around the world using a relatively new heavy timber structural material known as cross laminated timber (CLT). With its relatively light weight, there is consensus amongst the global wood seismic research and practitioner community that tall wood buildings have a substantial potential to become a key solution to building future seismically resilient cities. This paper introduces the NHERI Tallwood Project recentely funded by the U.S. National Science Fundation to develop and validate a seismic design methodology for tall wood buildings that incorporates high-performance structural and nonstructural systems and can quantitatively account for building resilience. This will be accomplished through a series of research tasks planned over a 4-year period. These tasks will include mechanistic modeling of tall wood buildings with several variants of post-tensioned rocking CLT wall systems, fragility modeling of structural and non-structural building components that affect resilience, fullscale biaxial testing of building sub-assembly systems, development of a resilience-based seismic design (RBSD) methodology, and finally a series of full-scale shaking table tests of a 10-story CLT building specimen to validate the proposed design. The project will deliver a new tall building type capable of transforming the urban building landscape by addressing urbanization demand while enhancing resilience and sustainability.