Skip header and navigation

Refine Results By

10 records – page 1 of 1.

Air-Borne Sound Transmission through Triple-Leaf Walls

https://research.thinkwood.com/en/permalink/catalogue2235
Year of Publication
2015
Topic
Acoustics and Vibration
Material
Light Frame (Lumber+Panels)
Application
Walls
Author
Eslami, Armin
Organization
Carleton University
Year of Publication
2015
Country of Publication
Canada
Format
Thesis
Material
Light Frame (Lumber+Panels)
Application
Walls
Topic
Acoustics and Vibration
Keywords
Mid-Rise
Airborne Sound
Model
Sound Transmission
Sound Insulation
Language
English
Research Status
Complete
Online Access
Free
Resource Link
Less detail

Analysis on Structureborne Sound Transmission at Junctions of Solid Wood Double Walls with Continuous Floors

https://research.thinkwood.com/en/permalink/catalogue1869
Year of Publication
2014
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Walls

Measurement of Airborne Sound Insulation of 8 Wall Assemblies Measurement of Airborne and Impact Sound Insulation of 29 Floor Assemblies

https://research.thinkwood.com/en/permalink/catalogue1864
Year of Publication
2015
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Walls
Author
Sabourin, Ivan
Organization
National Research Council of Canada
Publisher
National Research Council Canada. Construction
Year of Publication
2015
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Walls
Topic
Acoustics and Vibration
Keywords
Transmission Loss
Impact Sound Pressure Level
Language
English
Research Status
Complete
Series
Nordic Engineered Wood Report
Online Access
Free
Resource Link
Less detail

Guide to Calculating Airborne Sound Transmission in Buildings: Fifth Edition, December 2019

https://research.thinkwood.com/en/permalink/catalogue2617
Year of Publication
2019
Topic
Acoustics and Vibration
Design and Systems
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Floors
Walls
Author
Hoeller, Christoph
Quirt, David
Mahn, Jeffrey
Müller-Trapet, Markus
Organization
National Research Council of Canada. Construction
Publisher
National Research Council of Canada. Construction
Year of Publication
2019
Country of Publication
Canada
Format
Book/Guide
Material
CLT (Cross-Laminated Timber)
Light Frame (Lumber+Panels)
Application
Floors
Walls
Topic
Acoustics and Vibration
Design and Systems
Keywords
Apparent Sound Transmission Class
Sound Insulation
Sound Transmission
Concrete
Building Code
Impact Sound
Language
English
Research Status
Complete
Summary
In recent years, the science and engineering for controlling sound transmission in buildings have shifted from a focus on individual assemblies such as walls or floors, to a focus on performance of the complete system. Standardized procedures for calculating the overall transmission, combined with standardized measurements to characterize sub-assemblies, provide much better prediction of sound transmission between adjacent indoor spaces. The International Standards Organization (ISO) has published a calculation method, ISO 15712-1 that uses laboratory test data for sub-assemblies such as walls and floors as inputs for a detailed procedure to calculate the expected sound transmission between adjacent rooms in a building. This standard works very well for some types of construction, but to use it in a North American context one must overcome two obstacles – incompatibility with the ASTM standards used by our construction industry, and low accuracy of its predictions for lightweight wood or steel frame construction. To bypass limitations of ISO 15712-1, this Guide explains how to merge ASTM and ISO test data in the ISO calculation procedure, and provides recommendations for applying extended measurement and calculation procedures for specific common types of construction. This Guide was developed in a project established by the National Research Council of Canada to support the transition of construction industry practice to using apparent sound transmission class (ASTC) for sound control objectives in the National Building Code of Canada (NBCC). However, the potential range of application goes beyond the minimum requirements of the NBCC – the Guide also facilitates design to provide enhanced sound insulation, and should be generally applicable to construction in both Canada and the USA. This publication contains a limited set of examples for several types of construction, to provide an introduction and overview of the ASTC calculation procedure. Additional examples and measurement data can be found in the companion documents to this Guide, namely NRC Research Reports RR-333 to RR-337. Furthermore, the calculation procedure outlined and illustrated in this Guide is also used by the software web application soundPATHS, which is available for free on the website of the National Research Council of Canada (see the references in Section 7 of this Guide for access details).
Online Access
Free
Resource Link
Less detail

Finite Element Modeling for Vibration Transmission in a Cross Laminated Timber Structure

https://research.thinkwood.com/en/permalink/catalogue1633
Year of Publication
2016
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Vardaxis, Nikolaos-Georgios
Hagberg, Klas
Bard, Delphine
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Keywords
Sweden
Numerical Model
Finite Element Model
Impact Noise Transmission
Impact Sound
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2953-2962
Summary
This paper deals with a certain type of C.L.T. (Cross Laminated Timber) construction, in a residential building in Fristad, Sweden. The objective is to study impact noise transmission, at the lower frequency range (10-200 Hz), where wooden dwellings perform inefficiently, in terms of acoustic quality. The vibrational behavior of lightweight structures and specifically a multilayered floor separating two vertically adjacent bedrooms are investigated. A numerical model of the multilayered test plate, which includes sound insulation and vibration isolation layers, is developed using the Finite Element Method (F.E.M.) in commercial software. The design process, the analysis and improvement of the calculated outcome concerning accuracy and complexity are of interest. In situ vibration measurements were also performed so as to evaluate the structures dynamic behavior in reality and consequently the validity of the modelled results. The whole process from design to evaluation is discussed thoroughly, where uncertainties of the complex F.E.M. model and the approximations of the real structure are analyzed. Numerical comparisons are presented including mechanical mobility and impact noise transmission results. The overall aim is to set up a template of calculations that can be used as a prediction tool in the future by the industry and researchers.
Online Access
Free
Resource Link
Less detail

Sound Insulation Performance of Elevator Shaft Walls built with Nail-Laminated Timber Panels - Exploratory Tests and Preliminary Results

https://research.thinkwood.com/en/permalink/catalogue364
Year of Publication
2016
Topic
Acoustics and Vibration
Material
NLT (Nail-Laminated Timber)
Application
Shafts and Chases
Author
Pirvu, Ciprian
Organization
FPInnovations
Year of Publication
2016
Country of Publication
Canada
Format
Report
Material
NLT (Nail-Laminated Timber)
Application
Shafts and Chases
Topic
Acoustics and Vibration
Keywords
Building Codes
Canada
Sound Insulation
Apparent Sound Insulation Class
Language
English
Research Status
Complete
Summary
As 6-storey wood-frame, massive-timber and hybrid wood buildings are increasingly accepted by more jurisdictions across Canada, there is a need to develop reliable elevator shaft designs that meet the minimum structural, fire, and sound requirements in building codes. Elevator shaft walls constructed with wood-based materials have the advantages of material compatibility, use of sustainable materials, and ease of construction. In this exploratory study, selected elevator shaft wall designs built with nail-laminated-timber (NLT) structural elements were tested to investigate their sound insulation performance because little is known about the sound insulation performance of such wall assemblies. The tests were carried out in an acoustic mock-up facility in accordance to standard requirements, and provide preliminary data on the sound insulation performance of elevator shaft walls built with NLT panels. Four different elevator shaft walls built with NLT panels were tested and their measured apparent sound insulation class (ASTC) ratings ranged from 18 to 39 depending on their construction details. Some of the reasons that may have contributed to the ASTC ratings obtained for the elevator shaft walls described in this report as well as recommendations for future designs were provided. It is recommended to continue improving the sound insulation of elevator shaft walls built with NLT panels to meet or exceed the minimum requirements in building codes.
Online Access
Free
Resource Link
Less detail

In Situ Measured Flanking Transmission in Light Weight Timber Houses with Elastic Flanking Isolators

https://research.thinkwood.com/en/permalink/catalogue231
Year of Publication
2013
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Application
Floors
Wood Building Systems
Author
Ågren, Anders
Ljunggren, Fredrik
Organization
Inter-noise
Year of Publication
2013
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Floors
Wood Building Systems
Topic
Acoustics and Vibration
Keywords
Modules
Prefabrication
Sound Insulation
Elastomer Isolators
Language
English
Conference
Inter-noise 2013
Research Status
Complete
Notes
September 15-18, 2013, Innsbruck, Austria
Summary
There is a strong trend to industrially produce multi-storey light weight timber based houses. This concept allows the buildings to be manufactured to a more or less prefabricated extent. Most common types are volume/room modules or flat wall and floor modules. When assembling the modules at the building site, elastomer isolators are used in several constructions to reduce flanking transmission. The sound insulation demands in the Nordic countries are relatively high and therefore the flanking transmission must be well controlled, where elastomer isolators are an alternative. Decoupled radiation isolated walls is another. There are though no working studies or mathematical models of the performance of these isolators. They are only treated as simple mass-springs systems that operate vertically, i.e. one degree of freedom. In this paper there is an analysis of experimentally data of the structure borne sound isolating performance of elastomer isolators that are separating an excited floor from receiving walls. The performance dependence of structure type is also presented. An empirically based regression model of the vibration level difference is derived. The model is based on measurements of six elastomer field installations, which are compared to five comparable installations without elastomers. A goal is that the model can be used for input in future SEN prediction models for modeling of sound insulation.
Online Access
Free
Resource Link
Less detail

Experimental Analysis of Flanking Transmission of Different Connection Systems for CLT Panels

https://research.thinkwood.com/en/permalink/catalogue1632
Year of Publication
2016
Topic
Acoustics and Vibration
Connections
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Author
Speranza, Alice
Barbaresi, Luca
Morandi, Federica
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Wood Building Systems
Topic
Acoustics and Vibration
Connections
Keywords
Vibration Reduction Index
Fasteners
Flanking Transmission
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2904-2911
Summary
This paper presents the first results of the flanksound project, a study promoted by Rotho Blaas srl regarding flanking transmission between CLT panels jointed with different connection systems. The vibration reduction index Kij is evaluated according to the EN ISO 10848 standard by measuring the velocity level difference between CLT panels. The performance of the X-RAD connection system is compared to the performance of a traditional connection system made of shear angle bracket and hold-down, both the configurations being tested with and without a resilient material placed between the construction elements. Concerning the traditional system, the influence of the difference sizes and types of fasteners - including the method of nailing or screwing - was also evaluated. The results of the measurements exposed in this work will hopefully contribute to the development of the acoustic design of timber buildings by providing a solid database of Kij values, which can be used to forecast the acoustic performance of the building according to the prediction models proposed in EN 12354-1.
Online Access
Free
Resource Link
Less detail

Acoustically-Tested Mass Timber Assemblies

https://research.thinkwood.com/en/permalink/catalogue2639
Year of Publication
2020
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
Glulam (Glue-Laminated Timber)
MPP (Mass Plywood Panel)
Application
Floors
Walls

Acoustic Testing of CLT and Glulam Floor Assemblies

https://research.thinkwood.com/en/permalink/catalogue1863
Year of Publication
2016
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Author
Sabourin, Ivan
Organization
National Research Council of Canada
Publisher
Regupol America
Year of Publication
2016
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
Floors
Topic
Acoustics and Vibration
Keywords
Transmission Loss
Impact Sound Transmission
Impact Sound Pressure Level
Language
English
Research Status
Complete
Series
Nordic Engineered Wood Report
Online Access
Free
Resource Link
Less detail

10 records – page 1 of 1.