Skip header and navigation

Refine Results By

10 records – page 1 of 1.

Introduction of Concentrated Loads in CLT Wall Elements Parallel to Plane – Analytical Model for the Determination of Stresses and Simplification for Practice

https://research.thinkwood.com/en/permalink/catalogue1612
Year of Publication
2016
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Walls
Author
Bogensperger, Thomas
Augustin, Manfred
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Walls
Topic
Mechanical Properties
Keywords
Stress
Concentrated Loads
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 2332-2340
Summary
In this paper a proposal for the computation of stresses into orthotropic panels (e.g. CLT wall elements) caused by concentrated local load introduction in plane is derived on the basis of linear elastic mechanics. In practice the concept of effective width is often applied for the approximate determination of stresses. On the basis of the elastic...
Online Access
Free
Resource Link
Less detail

Test Method for Determining the In-Plane Shear Strength and Stiffness of Cross Laminated Timber (CLT)

https://research.thinkwood.com/en/permalink/catalogue1731
Year of Publication
2016
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Nygård, Anders
Björnfot, Anders
Tsalkatidis, Themistoklis
Tomasi, Roberto
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
In-Plane Shear Strength
In-Plane Shear Stiffness
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 4754-4763
Summary
The scope of this study is to evaluate the existing test methods for deciding the in-plane shear strength and stiffness of cross laminated timber (CLT) panels, and suggest a new test method. The evaluation of the existing methods point out that none of the methods isolate the pure membrane shear stress. This means that the results have to be interpreted...
Online Access
Free
Resource Link
Less detail

Strength and Stiffness of Cross Laminated Timber (CLT) Panels Produced with Pinus and Eucalyptus: Experimental and Analytical Comparisons

https://research.thinkwood.com/en/permalink/catalogue2453
Year of Publication
2019
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Pereira, Marcos Cesar de Moraes
Calil Junior, Carlito
Publisher
SciELO
Year of Publication
2019
Country of Publication
Brazil
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Strength
Stiffness
Language
English
Research Status
Complete
Series
Matéria (Rio J.)
ISSN
1517-7076
Online Access
Free
Resource Link
Less detail

Finite Element Analysis of Bending Stiffness for Cross-Laminated Timber with Varying Board Width

https://research.thinkwood.com/en/permalink/catalogue2455
Year of Publication
2019
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Berg, Sven
Turesson, Jonas
Ekevad, Mats
Huber, Johannes
Publisher
Taylor&Francis Online
Year of Publication
2019
Country of Publication
United Kingdom
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Finite Element Analysis
Board Width
Out-of-Plane Load
Language
English
Research Status
Complete
Series
Wood Material Science & Engineering
Online Access
Free
Resource Link
Less detail

Bending Stiffness and Capacity of Multilayered Structures (1D)

https://research.thinkwood.com/en/permalink/catalogue1539
Year of Publication
2016
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
General Application
Author
Moosbrugger, Thomas
Guggenberger, Theodor
Krenn, Harald
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Bending Stiffness
Bending Capacity
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 1069-1078
Summary
Within this paper the material and structural influences of orthogonal to the span oriented outer layers of multilayered plates are investigated. Therefore the influences on the bending stiffness and the bending capacity are examined...
Online Access
Free
Resource Link
Less detail

Estimation of Bending Stiffness, Moment Carrying Capacity and Internal Shear Force of Sugi CLT Panel

https://research.thinkwood.com/en/permalink/catalogue622
Year of Publication
2014
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Okabe, Minoru
Yasumura, Motoi
Kobayashi, Kenji
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Mechanical Properties
Keywords
Internal Shear Strength
Bending Strength
Moment Carrying Capacity
Monte Carlo
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
CLT panels consist of several layers of lumber stacked crosswise and glued together on their faces. Prototype Sugi CLT floor panels were manufactured and bending and internal shear tests were carried out under the different parameters of lumber MOE, numb...
Online Access
Free
Resource Link
Less detail

Experimental Verification of Design Procedure for Elements from Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue1353
Year of Publication
2017
Topic
Mechanical Properties
Design and Systems
Material
CLT (Cross-Laminated Timber)
Application
General Application

Bending Stiffness Increasing of Existing Pitch Pine Beams by Means of LVL Reinforcement

https://research.thinkwood.com/en/permalink/catalogue1568
Year of Publication
2016
Topic
Mechanical Properties
Material
LVL (Laminated Veneer Lumber)
Application
Beams
Author
Soilán, Azahara
Touza, Manuel
Arriaga, Francisco
Guaita, Manuel
Year of Publication
2016
Country of Publication
Austria
Format
Conference Paper
Material
LVL (Laminated Veneer Lumber)
Application
Beams
Topic
Mechanical Properties
Keywords
Pine
Self-Tapping Screws
Reinforcement
Rigidity
Bending Strength
Four Point Bending Test
Modulus of Rupture
Modulus of Elasticity
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 22-25, 2016, Vienna, Austria p. 1675-1681
Summary
Many buildings in Spain constructed with "pitch pine" beams are, nowadays, under rehabilitation processes. In some cases the decision on maintaining, or not, the existing timber structure is a key issue. The commercial name “pitch pine” comprises several species in the group of Southern Yellow Pines, being the “Longleaf pine”...
Online Access
Free
Resource Link
Less detail

Bending Strength and Stiffness of Glulam Beams Made of Thermally Modified Beech Timber

https://research.thinkwood.com/en/permalink/catalogue659
Year of Publication
2014
Topic
Mechanical Properties
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Author
Widmann, Robert
Beikircher, Wilfried
Cabo, José
Steiger, René
Publisher
Springer, Dordrecht
Year of Publication
2014
Country of Publication
Netherlands
Format
Book Section
Material
Glulam (Glue-Laminated Timber)
Application
Beams
Topic
Mechanical Properties
Keywords
MUF
PRF
Thermally Modified Timber
Beech
Load Carrying Behaviour
Four Point Bending Test
Delamination Tests
Shear Tests
Language
English
Research Status
Complete
Series
Materials and Joints in Timber Structures
ISBN
978-94-007-7811-5
Online Access
Payment Required
Resource Link
Less detail

Prediction of Bending Stiffness and Moment Carrying Capacity of Sugi Cross-Laminated Timber

https://research.thinkwood.com/en/permalink/catalogue604
Year of Publication
2013
Topic
Mechanical Properties
Material
CLT (Cross-Laminated Timber)
Application
Floors
Author
Okabe, Minoru
Yasumura, Motoi
Kobayashi, Kenji
Fujita, Kazuhiko
Publisher
Springer Japan
Year of Publication
2013
Country of Publication
Japan
Format
Journal Article
Material
CLT (Cross-Laminated Timber)
Application
Floors
Topic
Mechanical Properties
Keywords
Bending Stiffness
Moment Carrying Capacity
Monte Carlo
Modulus of Elasticity
Language
English
Research Status
Complete
Series
Journal of Wood Science
ISSN
1611-4663
Online Access
Free
Resource Link
Less detail

10 records – page 1 of 1.