Skip header and navigation

10 records – page 1 of 1.

Vibration and Sound Insulation Performance of Mass Timber Floors with Concrete Toppings

https://research.thinkwood.com/en/permalink/catalogue2548
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Ceilings
Organization
University of Northern British Columbia
Country of Publication
Canada
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Timber-Concrete Composite
Application
Floors
Ceilings
Topic
Acoustics and Vibration
Keywords
Concrete Topping
Acoustic Membrane
Exposed Mass Timber Elements
Research Status
In Progress
Notes
Project contact is Jianhui Zhou at the University of Northern British Columbia
Summary
The impact sound perceived in the lower volume in a building is radiated by the vibration of the ceiling transmitted from the vibration of the floor generated by an impact source in the upper volume. Thus, the dynamic behaviour of a floor is one crucial intermediate step to understand the impact sound insulation performance of such a floor. A key to reducing the impact sound is to isolate the structural floor from the subfloor. Floating floor construction is a common way of improving the impact sound insulation, which is to float a concrete topping on the mass timber floor with an elastic layer in between. There are two types of floating floor solutions, a) with a continuous elastic layer and b) with point bearing elastic mounts as shown in Figure 1. This study will investigate both solutions and will provide guidance on how to adopt both solutions for mass timber floors with an exposed ceiling. The objectives of this project are: 1. To measure the sound insulation performance of mass timber floors with full-scale concrete topping on various continuous elastic interlayer materials 2. To measure the sound insulation performance of mass timber floors with full-scale concrete topping on discrete elastic load mounts
Less detail

Acoustical Performance of Mass Timber Building Elements

https://research.thinkwood.com/en/permalink/catalogue2553
Topic
Acoustics and Vibration
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Floors
Walls
Country of Publication
Canada
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
NLT (Nail-Laminated Timber)
Application
Floors
Walls
Topic
Acoustics and Vibration
Keywords
Sound Insulation
Acoustic Membrane
Acoustical Performance
Research Status
In Progress
Notes
Project contact is Jianhui Zhou at the University of Northern British Columbia
Summary
Building acoustics has been identified as one of the key subjects for the success of mass timber in the multi-storey building markets. The project will investigate the acoustical performance of mass timber panels produced in British Columbia. The apparent sound transmission class (ASTC) and impact insulation class (AIIC) of bare mass timber elements as wall and/ or floor elements will be measured through a lab mock-up. It is expected that a database of the sound insulation performance of British Columbia mass timber products will be developed with guidance on optimal acoustical treatments to achieve different levels of performance.
Less detail

Design Options for Three- and Four-Storey Wood School Buildings in British Columbia

https://research.thinkwood.com/en/permalink/catalogue2373
Year of Publication
2019
Topic
Design and Systems
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
Other Materials
Timber (unspecified)
Application
Wood Building Systems
General Application
Author
Bevilacqua, Nick
Dickof, Carla
Wolfe, Ray
Gan, Wei-Jie
Embury-Williams, Lynn
Organization
Fast + Epp
Wood Works! BC
Thinkspace
Year of Publication
2019
Country of Publication
Canada
Format
Report
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
Other Materials
Timber (unspecified)
Application
Wood Building Systems
General Application
Topic
Design and Systems
Keywords
Construction
Education
School Buildings
Mass Timber
Multi-Storey
Building Code
Fire Protection
Language
English
Research Status
Complete
Summary
This study illustrates the range of possible wood construction approaches for school buildings that are up to four storeys in height. As land values continue to rise, particularly in higher-density urban environments, schools with smaller footprints will become increasingly more necessary to satisfy enrollment demands. There are currently a number of planned new school projects throughout British Columbia that anticipate requiring either three-or four-storey buildings, and it is forecasted that the demand for school buildings of this size will continue to rise. This study is closely related to the report Risk Analysis and Alternative Solution for Three- and Four-Storey Schools of Mass Timber and/or Wood-Frame Construction prepared by GHL Consultants, which explores the building code related considerations of wood construction for school buildings that are up to four storeys in height. Though wood construction offers a viable structural material option for these buildings, the British Columbia Building Code (BCBC 2018) currently limits schools comprised of wood construction to a maximum of two storeys, while also imposing limits on the overall floor area. As such, the reader is referred to the GHL report for further information regarding building code compliance (with a particular emphasis on fire protection) for wood school buildings.
Online Access
Free
Resource Link
Less detail

Lumber-Based Mass Timber Products in Construction

https://research.thinkwood.com/en/permalink/catalogue2163
Year of Publication
2019
Topic
General Information
Material
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
DLT (Dowel Laminated Timber)
CLT (Cross-Laminated Timber)
Application
General Application

Uses of Wood and Wood Products in Construction

https://research.thinkwood.com/en/permalink/catalogue1390
Year of Publication
2018
Topic
General Information
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
General Application
Author
Olorunnisola, Abel
Publisher
Springer, Cham
Year of Publication
2018
Country of Publication
Switzerland
Format
Book Section
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
NLT (Nail-Laminated Timber)
Application
General Application
Topic
General Information
Keywords
Africa
Codes
Language
English
Research Status
Complete
Series
Design of Structural Elements with Tropical Hardwoods
ISBN
978-3-319-65343-3
Online Access
Payment Required
Resource Link
Less detail

Wood Design Manual 2017

https://research.thinkwood.com/en/permalink/catalogue2160
Year of Publication
2017
Topic
Design and Systems
Connections
Fire
Seismic
Material
CLT (Cross-Laminated Timber)
NLT (Nail-Laminated Timber)
Glulam (Glue-Laminated Timber)
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
PSL (Parallel Strand Lumber)
Light Frame (Lumber+Panels)
DLT (Dowel Laminated Timber)
Application
General Application
Beams
Bridges and Spans
Columns
Floors
Ceilings
Arches
Shear Walls
Trusses
Walls

NHERI Tall Wood Project

https://research.thinkwood.com/en/permalink/catalogue2556
Topic
Seismic
Design and Systems
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
MPP (Mass Plywood Panel)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Organization
Colorado School of Mines
LEVER Architecture
Lehigh University
University of Washington
University of Nevada
University of California San Diego
Colorado State University
Oregon State University
TallWood Design Institute
Forest Products Laboratory
Country of Publication
United States
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
MPP (Mass Plywood Panel)
NLT (Nail-Laminated Timber)
Application
Wood Building Systems
Topic
Seismic
Design and Systems
Keywords
Lateral Seismic Loads
Resilience-Based Seismic Design
Performance-Based Seismic Design
Commercial Buildings
Open Floor Plan
Research Status
In Progress
Notes
Project contact is Shiling Pei at the Colorado School of Mines
Summary
NHERI Tallwood project is an effort to develop and validate a resilient-based seismic design methodology for tall wood buildings. The project started in September 2016 and will last till 2020. The project team will validate the design methodology through shake table testing of a 10-story full-scaled wood building specimen at NHERI@UCSD. It will be the world's largest wood building tested at full-scale.
Resource Link
Less detail

Review of State of the Art of Dowel Laminated Timber Members and Densified Wood Materials as Sustainable Engineered Wood Products for Construction and Building Applications

https://research.thinkwood.com/en/permalink/catalogue2385
Year of Publication
2020
Topic
Design and Systems
Mechanical Properties
Material
DLT (Dowel Laminated Timber)
Application
Wood Building Systems
General Application

Use of Sustainable Wood Building Materials in Bosnia and Herzegovina, Slovenia and Sweden

https://research.thinkwood.com/en/permalink/catalogue836
Year of Publication
2017
Topic
Design and Systems
Environmental Impact
Material
CLT (Cross-Laminated Timber)
DLT (Dowel Laminated Timber)
Glulam (Glue-Laminated Timber)
LSL (Laminated Strand Lumber)
LVL (Laminated Veneer Lumber)
PSL (Parallel Strand Lumber)
Application
Wood Building Systems

Tectonic Strategies for Using Fast-Growing, Low-Grade Softwoods for Engineered Wood Products

https://research.thinkwood.com/en/permalink/catalogue565
Year of Publication
2014
Topic
Mechanical Properties
Material
DLT (Dowel Laminated Timber)
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
General Application
Author
Fleming, Patrick
Ramage, Michael
Year of Publication
2014
Country of Publication
Canada
Format
Conference Paper
Material
DLT (Dowel Laminated Timber)
CLT (Cross-Laminated Timber)
Glulam (Glue-Laminated Timber)
Application
General Application
Topic
Mechanical Properties
Keywords
Low-Grade
Softwood
Polymer Impregnated
Stress Laminated
Language
English
Conference
World Conference on Timber Engineering
Research Status
Complete
Notes
August 10-14, 2014, Quebec City, Canada
Summary
The proposed paper presents two alternative strategies for using fast-growing, low-grade softwood for modern engineered wood products. A chemical based strategy is explored first with the testing of polymer-impregnated small clear wood samples. A second ...
Online Access
Free
Resource Link
Less detail

10 records – page 1 of 1.