Project contact is Jean Proulx at Université de Sherbrooke
This project will involve the modeling of typical multistage buildings and non-linear dynamic analyzes for various seismic hazards (Montreal, Quebec, Charlevoix). The models will be developed using OpenSees, and validated with commercial software (SAFI, SAP2000). The temporal responses of typical buildings, subject to earthquakes generated for the region, will be calculated for different parameters (number of floors, bays, types of SRFS). Pushover type analyzes will also be carried out (rigid frame systems or shear walls). Sectional ductility demands will be evaluated for different types of wood sections and assemblies. These ductility values will be used to target the best wood seismic resistance systems, depending on the type of construction.
This paper presents the modeling of coupling effect of tension and shear loading on Cross Laminated Timber (CLT) connections using a finite element based algorithm called HYST. The model idealizes the connections as a “Pseudo Nail” - elastoplastic beam elements (the nail) surrounded by compression-only spring elements (steel sheath and wood embedment). A gap size factor and an unloading stiffness degradation index of the spring elements under cyclic loading were integrated into the optimized HYST algorithm to consider the coupling effect. The model was calibrated to compare with 32 configurations of CLT angle bracket and hold-down connections tests: in tension with co-existent constant shear force, and in shear with co-existent tension force. The results showed that the proposed model can fully capture the coupling effect of typical CLT connections, considering strength degradation, unloading and reloading stiffness degradation, and pinching effect. The model provided a useful tool for nailbased timber connections and a mechanism-based explanation to understand the hysteretic behaviour of CLT connections under bi-axial loading.
Project contact is Sylvain Ménard at Université du Québec à Chicoutimi
Assemblies with glued-in rods allow architectural freedom. They are in fact invisible since they are found in the mass of the structural element. Some work has begun to document this type of assembly by considering static tests in single-sided traction and single-sided creep tests (Verdet, 2016). In order to continue this effort to specify the limits of this type of assembly, it is proposed to consider the lateral forces for assemblies with single and multiple rod connections. This project will therefore aim to document the ability of these assemblies to carry lateral loads.
This paper presents an experimental study on ductility and overstrength of dowelled connections. Connection ductility and overstrength derived from monotonic testing are often used in timber connection design in the context of seismic loading, based on the assumption that these properties are similar under monotonic and cyclic loading...
The load distribution in multi-dowel timber connections under bending moments was investigated by means of an integrative evaluation of a hierarchically organized test program, which encompassed component tests as well as single-dowel and multi-dowel connection tests. It was demonstrated that the anisotropic material...